"Wilhelm" on YouTube - this is my channel

[Wilhelm]

Makita XS5000, first cold start after she had been drained of fluids and aired out for international shipping.
First start in Europe/Croatia

 

[Wilhelm]

Makita EA5000, XS Ported, square filed Oregon EXL chain (3/8", 20", 72DL), dry knotty beech

 

[SOS Ridgerider]

Makita EA5000, XS Ported, square filed Oregon EXL chain (3/8", 20", 72DL), dry knotty beech

That looks damn good for a 50cc with a buried 20” bar, if you ask me. I know that wood you’re cutting is hard too Wilhelm.

 

[Wilhelm]

That beech log is a section of a huge crotch, see picture attached bellow.


It truly is hard on the saw and chain, in the video one can hear the saw stutter as the chain chattered going through the red colored crotch area.

Thank You for watching and commenting Sondre!

 

[Shane10]

All your saws cut super nice and I like your axes to. Compliments on your nice looking grass as well. Thank you for sharing sir.


Sent from my iPad using Tapatalk

 

[Wilhelm]

Thank You for watching and commenting!

 

[Wilhelm]

First ever start of a new Dolmar PS-9010

 

[Wilhelm]

First ever bucking cuts with a new Dolmar PS-9010.
24" hard nose bar, brand new Stihl Rapid Super 3/8" full complement chain, 8 tooth sprocket.
Wood is a very knotty turkey oak log.
Saw required a re-tune of the carb after the first two cuts.

 

[RI Chevy]

Nice Wilhelm. Now you gotta gut that big muffler. [emoji106]
You using 3/8 8 pin?
Bar a sprocket top or hard nose?

 

[Wilhelm]

Dolmar PS-9010 second ever cold start, the saw had fuel in the tank from the last usage

 

[Wilhelm]

Nice Wilhelm. Now you gotta gut that big muffler. [emoji106]
You using 3/8 8 pin?
Bar a sprocket top or hard nose?

She is wearing Stihl RS 3/8" in that video, bar is 24" (true 23") hard nose, 8 tooth sprocket.

Muffler gutting and carb limiter pulling is on my lengthy to-do-list.

 

[RI Chevy]

Nice Wilhelm. Good luck with it.

 

[Wilhelm]

Dolmar PS-9010 , 24" hard nose bar , Stihl Rapid Super .325" chain , 9 tooth sprocket.
Log is knotty turkey oak.
Still first tank of fuel for this saw.

 

[Wilhelm]

Dolmar PS-9010 , second tank of fuel , carb had been re-tuned that day , .325" Stihl Rapid Super full complement chain , 9 tooth sprocket , turkey oak log

 

[huskyboy]

Wait till you gut the muffler, with just that alone they run like this...

It’s a torquey tugboat.

 

[Wilhelm]

Makita XS5000 action, square filed Oregon EXL in ash.

 

[Wilhelm]

Makita XS5000 action, round filed Oregon EXL in ash.

 

[Wilhelm]

Makita XS5000 action, round filed Oregon LGX

 

[Wilhelm]

Makita XS5000 action, Oregon Vanguard chain about half worn with modified rackers and round filed with an Archer FastFiler sharpening jig

 

[Wilhelm]

Makita XS5000 action, Archer chisel chain, factory round ground