High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

why does H&L supply say 372 Hyway bb kit wont work on xtorque ?

Spike60

Here For The Long Haul!
Local time
10:52 AM
User ID
835
Joined
Feb 8, 2016
Messages
1,942
Reaction score
16,671
Location
Ulster County, NY
Country flag
Those thick rings are likely 1.5mm. They would work in a 272 which is also 52mm.
 

Willoughby

Well-Known OPE Member
Local time
8:52 AM
User ID
10006
Joined
Jul 22, 2019
Messages
64
Reaction score
57
Location
NW MT
Country flag
The valve on an oe 372 is on the side a xt 372 angled on the top.
that's a good way to ID but im all for decomp I also ordered new top plastic - it hard for me to pull a lot of psi
 

Willoughby

Well-Known OPE Member
Local time
8:52 AM
User ID
10006
Joined
Jul 22, 2019
Messages
64
Reaction score
57
Location
NW MT
Country flag
Those thick rings are likely 1.5mm. They would work in a 272 which is also 52mm.
there too thick for the 52mm hyway 372 kit I bought , but I do have a 272,
thank you sir
 
Last edited:

Stump Shot

Disciple of Monkey's
GoldMember
Local time
9:52 AM
User ID
1377
Joined
Jun 5, 2016
Messages
33,235
Reaction score
210,428
Location
Northwoods of Wisconsin
Country flag
there too thick for the 52mm hyway 372 kit I bought , thank you sir

Big bore kits don't have a "standard" to set to, so can be just about anything. Measure the thickness even if in thousandths of an inch it can be converted to MM, then we can figure this out. I'm going to guess it's 1.2MM but there's no telling for sure.
 

Willoughby

Well-Known OPE Member
Local time
8:52 AM
User ID
10006
Joined
Jul 22, 2019
Messages
64
Reaction score
57
Location
NW MT
Country flag
what does the extra fuel -vent line go to on the e-torque ? it goes into a green elbow near top of tank =also there are 2 small orange nipples to the right of intake ? does it go to one of them ? if so which one?
 

beaglebriar

The Peanut Gallery
GoldMember
Local time
10:52 AM
User ID
377
Joined
Jan 1, 2016
Messages
19,431
Reaction score
111,547
Location
Warren Center, PA
Country flag
what does the extra fuel -vent line go to on the e-torque ? it goes into a green elbow near top of tank =also there are 2 small orange nipples to the right of intake ? does it go to one of them ? if so which one?
Stick it right there...
6b0facd3a8afeeb5edc31b839989fc70.jpg
 
Top