DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[Wilhelm]

You Dolmar dealer gentleman, can any of You tell me what part number 663111528 is!?

Web shop says "flag", no pictures.
Another part number says flag pole so I was wondering whether it is a Dolmar flag and not some mechanical part.
A quick Google search did neither confirm nor dispute it being a Dolmar flag - but it does seem to be one.

I'm just curious as I am browsing and adding stuff to my reminder list and cart.

 

[Wilhelm]

. . . Picked up a couple Dolmars the other day: a very low hour 7900 that a tree fell on and a 133 Super.
View attachment 118570
Found a new handle/lower assembly on eBay as well as a brake flag, going to be looking for a muffler. . . .

I have a ugly used muffler that I'd be willing to sell.
It is a PS-7300 muffler, so non SLR.

As said it's ugly, has been welded poorly after it apparently started to come apart - not my handy work, that's how I purchased it.
It would be a decent candidate for a full muffler mod.

I can post pictures if You are interested.

Yes I'm from Europe!
No, I'm not a scammer!

 

[usmcbuckwild]

The only ignition upgrade is a SEM coil with matching flywheel. But sometimes the SEM fails to. Replace the flywheel. First thing is to find out if the kill switch wire is not grounding to the case.
Replace the kill switch wire, no spark then fix the ignition capacitor.

That’s what i thought. Thanks for confirmation.

 

[usmcbuckwild]

I have a ugly used muffler that I'd be willing to sell.
It is a PS-7300 muffler, so non SLR.

As said it's ugly, has been welded poorly after it apparently started to come apart - not my handy work, that's how I purchased it.
It would be a decent candidate for a full muffler mod.

I can post pictures if You are interested.

Yes I'm from Europe!
No, I'm not a scammer!

SCAMMER!!! Hahaha

Please post a couple pics. Not sure what the shipping would be to the US.

 

[Wilhelm]

SCAMMER!!! Hahaha

Please post a couple pics. Not sure what the shipping would be to the US.

I can give You a shipping quote, just have to weigh the muffler first as shipping is weight dependent.
I'll up a couple pictures too, just have to switch over to my desktop PC.

Stay tuned, going to weigh the muffler and take care of an splitting ax measurement that has been dragging out, then I'll post info and pictures.

 

[usmcbuckwild]

I can give You a shipping quote, just have to weigh the muffler first as shipping is weight dependent.
I'll up a couple pictures too, just have to switch over to my desktop PC.

Stay tuned, going to weigh the muffler and take care of an splitting ax measurement that has been dragging out, then I'll post info and pictures.

Sweet! Thanks!

Shipping is to 28540

 

[Wilhelm]

Sweet! Thanks!

Shipping is to 28540

Well, the muffler weighs ~360 gram, that places it in the weight class of up to 500 gram small packages as long as I can keep the weight including packing material under 500.
Shipping to the US for a small package up to 500 gram is 94 Croatian Kuna, which is somewhere in the ballpark of 15 USD.

Next weight class is 500 grams up to 1000 gram which costs 132 Croatian Kuna (~22 USD).

Shipping is with tracking number.
No customs declaration necessary.

Pictures of muffler, no spark arrester screen, baffle/bird cage intact:



For argument sake lets say 25$ + shipping which makes it best case scenario 40$ shipped (worst case 47$ shipped).
There is nothing that can break so I can try and go cheap on packing material (which generally is not my style).

I also have some other small items that are mostly functional or serviceable but I swapped them out due to reliability and aesthetics:
- oil pump (defective worm gear drive, pump needs rebuild kit as adjusting screw is boogered)
- oil lines, suction and pressure
- chain brake flag including most adjoining mechanical parts (small hole burned into flag)
- clutch drum (blued from slippage)
- clutch weights with springs but NO spider
- aluminum heat shield
- bar guide plate
- red AF cover (has a small crack)
- flat black AF cover (has scuffs)
- clutch cover (one ugly, one abused)
- two bar studs
- four clutch cover nuts (one is basically trashed)

All of the above came off my Dolmar PS-7310 and Dolmar PS-7300 which I purchased used and abused last year.
I replaced all the parts with new OEM as I knew these saws will stay with me - as You can imagine that wasn't cheap.
All the parts show wear from usage and abuse, I can and will post pictures if desired.

Just looking to get back some cash and not let the parts go to waste considering that whatever my saws may require in the future I'll most likely purchase new OEM anyways.

Funds, PayPal Friends&Family will do.
I can quote members that can vouch for me if desired.

If You are not interested, no problem - no harm done!
I know from own experience that shipping is a big killjoy.

 

[usmcbuckwild]

Well, the muffler weighs ~360 gram, that places it in the weight class of up to 500 gram small packages as long as I can keep the weight including packing material under 500.
Shipping to the US for a small package up to 500 gram is 94 Croatian Kuna, which is somewhere in the ballpark of 15 USD.

Next weight class is 500 grams up to 1000 gram which costs 132 Croatian Kuna (~22 USD).

Shipping is with tracking number.
No customs declaration necessary.

Pictures of muffler, no spark arrester screen, baffle/bird cage intact:
View attachment 118632 View attachment 118633 View attachment 118634
View attachment 118635 View attachment 118636

For argument sake lets say 25$ + shipping which makes it best case scenario 40$ shipped (worst case 47$ shipped).
There is nothing that can break so I can try and go cheap on packing material (which generally is not my style).

I also have some other small items that are mostly functional or serviceable but I swapped them out due to reliability and aesthetics:
- oil pump (defective worm gear drive, pump needs rebuild kit as adjusting screw is boogered)
- oil lines, suction and pressure
- chain brake flag including most adjoining mechanical parts (small hole burned into flag)
- clutch drum (blued from slippage)
- clutch weights with springs but NO spider
- aluminum heat shield
- bar guide plate
- red AF cover (has a small crack)
- flat black AF cover (has scuffs)
- clutch cover (one ugly, one abused)
- two bar studs
- four clutch cover nuts (one is basically trashed)

All of the above came off my Dolmar PS-7310 and Dolmar PS-7300 which I purchased used and abused last year.
I replaced all the parts with new OEM as I knew these saws will stay with me - as You can imagine that wasn't cheap.
All the parts show wear from usage and abuse, I can and will post pictures if desired.

Just looking to get back some cash and not let the parts go to waste considering that whatever my saws may require in the future I'll most likely purchase new OEM anyways.

Funds, PayPal Friends&Family will do.
I can quote members that can vouch for me if desired.

If You are not interested, no problem - no harm done!
I know from own experience that shipping is a big killjoy.

I’ll take the muffler, aluminum head shield and brake flag. You take PayPal?

 

[usmcbuckwild]

Pics of carnage:



Like I said; low hour saw. Barely any scratches or chips in the paint.

 

[Wilhelm]

I’ll take the muffler, aluminum head shield and brake flag. You take PayPal?

Heat shield:

Brake flag, see next post.

Yes, PayPal F&F will be fine.

Pics of carnage:

View attachment 118645 View attachment 118646 View attachment 118647 View attachment 118648 View attachment 118649

Like I said; low hour saw. Barely any scratches or chips in the paint.

The broken plastics can be replaced, engine looks good that's the important thing!
"Like" for a hopefully good score.

 

[Wilhelm]

I’ll take the muffler, aluminum head shield and brake flag. You take PayPal?

Brake flag & mechanical parts:



Small hole molten into brake flag from the muffler coming apart, otherwise no damage.
Mechanical parts just dirty from vulcanized rubber (?!?), chain brake was fully functional when I replaced it.

You don't have to take the mech.parts if You don't need them - just let me know.

The chain brake flag weighs 140 gram , that will place the package in the up to 1000 gram weight limit, as such 22$ for shipping (just so we are clear on this as I have no influence on shipping costs whatsoever).

How does 15$ for the brake flag only, or 20$ for brake flag including mech.parts sound + 25$ muffler + 22$ shipping?

 

[Wilhelm]

Muffler:


Chain brake flag:


Apologies to everyone else for the derail, I guess we could have gone to PM's with this.

 

[usmcbuckwild]

Brake flag & mechanical parts:
View attachment 118655 View attachment 118656
View attachment 118657 View attachment 118658

Small hole molten into brake flag from the muffler coming apart, otherwise no damage.
Mechanical parts just dirty from vulcanized rubber (?!?), chain brake was fully functional when I replaced it.

You don't have to take the mech.parts if You don't need them - just let me know.

The chain brake flag weighs 140 gram , that will place the package in the up to 1000 gram weight limit, as such 22$ for shipping (just so we are clear on this as I have no influence on shipping costs whatsoever).

How does 15$ for the brake flag only, or 20$ for brake flag including mech.parts sound + 25$ muffler + 22$ shipping?

Just need the actual flag, don’t need mechanical parts. PM me a PayPal address and I’ll get it sent over.

 

[Wilhelm]

Just need the actual flag, don’t need mechanical parts. PM me a PayPal address and I’ll get it sent over.

Yes, I noticed in Your pictures that the mechanical parts are spotless.

PM inbound.

 

[ajschainsaws]

Pics of carnage:

View attachment 118645 View attachment 118646 View attachment 118647 View attachment 118648 View attachment 118649

Like I said; low hour saw. Barely any scratches or chips in the paint.

Those pair are a good score the 79 will clean up nice

 

[hseII]

Just need the actual flag, don’t need mechanical parts. PM me a PayPal address and I’ll get it sent over.

$5 for complete spare parts to rebuild is cheap.

 

[usmcbuckwild]

Those pair are a good score the 79 will clean up nice

Yup. I was beyond surprised when I looked inside the cylinder. I would be willing to bet that saw has less than 10 tanks through it.

The 133S is looking to be a pain in the a$$. I think I am going to go the Nova II route with the ignition system. Found a flywheel but its going to hurt to have to pay for it.

I don’t buy saws often but when I do I try to get them for the best deal I can. Not out to make money, this is more of a hobby and therapy session.

 

[usmcbuckwild]

$5 for complete spare parts to rebuild is cheap.

I was worried about driving the shipping costs up. Not too many Dolmar saws around here, so no real use for them. Someone else who NEEDS those parts will be along to get them.

 

[hseII]

Yup. I was beyond surprised when I looked inside the cylinder. I would be willing to bet that saw has less than 10 tanks through it.

The 133S is looking to be a pain in the a$$. I think I am going to go the Nova II route with the ignition system. Found a flywheel but its going to hurt to have to pay for it.

I don’t buy saws often but when I do I try to get them for the best deal I can. Not out to make money, this is more of a hobby and therapy session.

Pics of the 133S please.

 

[mgr1]

Yup. I was beyond surprised when I looked inside the cylinder. I would be willing to bet that saw has less than 10 tanks through it.

The 133S is looking to be a pain in the a$$. I think I am going to go the Nova II route with the ignition system. Found a flywheel but its going to hurt to have to pay for it.

I don’t buy saws often but when I do I try to get them for the best deal I can. Not out to make money, this is more of a hobby and therapy session.

@Fruecrue he has maybe a spare flywheel from his conversion.