DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread

[RI Chevy]

Hmm. Thanks Steve.

 

[ajschainsaws]

What model AJ? I am a Dolmar rookie.

Hey Jeff your signature needs fugg8ng again there ain’t no Makita in the line out

 

[RI Chevy]

LMAO. A couple more cocktails and I'll figure something out.

 

[old_sir_henry]

The 116Si & 120Si series started in '87. Evolved into the 6000 & 6800 in '95. Ended production in 2003 or so with only the 6000 being made.

And thus the 6000i & 6800i were the final incarnation of the basic layout of the Sachs-Dolmar 112 and 114, which were introduced way back in the late 1970s. Not quite the same construction but the basic layout was all the same throughout 25 years of production.

 

[Wilhelm]

WTF, why did I stop getting notification for this thread?!

I make one post in the Echo thread and all goes to hell . . .

What model is this, can one tell from crappy pictures:



It is obviously a 1xx series model, but which one?
Local to Croatia, no point of You guys searching for the ad on eBay.

EDIT/P.S.:
It is amazing how sellers advertise a saw as in perfect condition, but do not state any saw model designation nor are any decals left on the saw in question!

 

[old_sir_henry]

133 or more likely 143

 

[Wilhelm]

133 or more likely 143

Ok, thank You.

All is good, as long as I don't miss out on a 166.

 

[old_sir_henry]

Whats the price tag then?

 

[old_sir_henry]

Here is another small vs. big:

 

[Wilhelm]

Whats the price tag then?

Seller is asking for 270€ (plus shipping)

Here is another small vs. big:

View attachment 156506

Aaaw, I gifted my Junior to my nephew.
I might have to get another one.

 

[old_sir_henry]

Seller is asking for 270€ (plus shipping)

That sounds like a reasonable price if the saw is in good condition (assuming it
really is a 143).
Here in Germany you'll hardly get one for that amount, however
shipping will change the picture.
Would be interesting if I didn't already own a 143

 

[jjdlc]

Finally got around to buttoning it back up today.

 

[old_sir_henry]

Great! They have a real mean sound when you pull the trigger. Does your's have american spec muffler or the european one
with the exhaust tube pointing the the right side?

 

[old_sir_henry]

Very Interesting to see this Saw , I’ve seen a few blue Makita 309 power cutters
But never a 120

I have mailed some questions about my blue Dolmar 120 si to a guy I dealt with previously and know he's working at Dolmar / Makita Service in Hamburg.
See if he can shed some light on this mysterious saw, although I'm doubtful. Dolmar/Makita has no reputation for excellence in maintaining a covering archive though...
Answer, if any is to be expected as early as next year. I'll keep you informed.

 

[ajschainsaws]

I have mailed some questions about my blue Dolmar 120 si to a guy I dealt with previously and know he's working at Dolmar / Makita Service in Hamburg.
See if he can shed some light on this mysterious saw, although I'm doubtful. Dolmar/Makita has no reputation for excellence in maintaining a covering archive though...
Answer, if any is to be expected as early as next year. I'll keep you informed.

It looks a similar situation too solo I’ve seen one later Rex and a couple of supers
That where yellow blue and had a red starter recoil about the same time
The 70 was launched I gotta feeling a bit of experimenting went on in germany

 

[old_sir_henry]

Got some premature infos from my Dolmar guy. He confirmed that blue / teal Dolmars were produced
after the Makita takeover.
Hopefully more details to follow when he's back in the office next week.

 

[how57]

Looking for a 28” 3/8 .050 bar with Sachs Dolmar on it. Going on a 120si. I have an add up on the boards. Do they exist?

 

[old_sir_henry]

Looking for a 28” 3/8 .050 bar with Sachs Dolmar on it. Going on a 120si. I have an add up on the boards. Do they exist?

Probably not as factory supply. Longest bar for 120si, that is with small K095 mount was 21", there are perhaps 24" original bars available.
But I have seen aftermarket bars with "SACHS DOLMAR" printed on them but can't name a source.

 

[how57]

Probably not as factory supply. Longest bar for 120si, that is with small K095 mount was 21", there are perhaps 24" original bars available.
But I have seen aftermarket bars with "SACHS DOLMAR" printed on them but can't name a source.

You’re right on the manufacturers bar length. For got about that. I think I’m looking for something that doesn’t even is available. I might be able to find a Windsor bar and make one.

 

[old_sir_henry]

I might be able to find a Windsor bar and make one.

Do you silk screen bars?