TACHOMETER

[rkious]

Any body use the 5910 850 1100 Tach ? Does it do 2 and 4 stroke? What Tach would you recommend?

Thanks in advance

 

[backhoelover]

Is that the edt 7, 8, or 9

 

[PissRev]

I use the OZ USA tach and hour meter. It has a wire but all you have to do is get it close to the spark plug or coil. I have 2 and they are both very close in reading weather hooked to the plug wire or not.

 

[Definitive Dave]

Is that the edt 7, 8, or 9

thats the edt 9
i prefer the DTI 20K for a handful of reasons, faster, better wireless range, replaceable battery, better warranty - but the DTI isnt really mountable on a saw, for that I would go with any of the sub $40 tach/hour meter combo units

 

[DSS]

I bought a chinese one on ebay for $7. Yes you have to wrap the wire but it's still going about four years later.

 

[Definitive Dave]

I bought a chinese one on ebay for $7. Yes you have to wrap the wire but it's still going about four years later.

pretty hard to beat that value

 

[Crzybowhntr]

I bought a chinese one on ebay for $7. Yes you have to wrap the wire but it's still going about four years later.

Is the particular model that you bought still available? I have a 20k but would like to have a permanent one, too.

 

[DSS]

Is the particular model that you bought still available? I have a 20k but would like to have a permanent one, too.

It's very much like this one

http://www.ebay.com/itm/For-Boat-Mo...ash=item1a198bf949:g:vXQAAOSwuTxV7roB&vxp=mtr

 

[dall]

lol jamey its like the one you saw in my building the one i have on my 036 is the works connection mounted wired one

 

[Crzybowhntr]

It's very much like this one

http://www.ebay.com/itm/For-Boat-Mo...ash=item1a198bf949:g:vXQAAOSwuTxV7roB&vxp=mtr

Thanks.

 

[Cut4fun]

Read before you buy a tach. http://chainsawrepair.createaforum.com/stickys-of-how-to-basics/chainsaw-tachometer-choices/

IMO you want fastest refresh rate, unless your mounting cheapie to mill with.

 

[Crzybowhntr]

Read before you buy a tach. http://chainsawrepair.createaforum.com/stickys-of-how-to-basics/chainsaw-tachometer-choices/

IMO you want fastest refresh rate, unless your mounting cheapie to mill with.

100% agree. I also have a DTI 20K.

 

[rkious]

Looks like the "DTI 20K" is the way to go .

Thanks,

Ross

 

[T.Roller]

I've had my "works connection " tach on my 395 for going on 5 years

 

[RI Chevy]

I have a tini tach. Works well.

 

[Big1066ih]

View attachment 59922 I have a tini tach. Works well.

I have one also, haven't had a chance to use it but once. Seems good, got to figure out a way to attach it

 

[dall]

I have one also, haven't had a chance to use it but once. Seems good, got to figure out a way to attach it

they do not work if they are closer than 3 inches to the plug wire

 

[RI Chevy]

I just keep it in my pocket and use it on multiple saws.
Good advice Dallas. I figured it out after I was getting weird readouts when I was touching the plastic. Got better results when I held it away from the plug by a few inches.

 

[dall]

I just keep it in my pocket and use it on multiple saws.
Good advice Dallas. I figured it out after I was getting weird readouts when I was touching the plastic. Got better results when I held it away from the plug by a few inches.

dti has good customer service and i have called and talked to them they said hold away 3 inches or it will act up

 

[RI Chevy]

Yup. That is true. Good advice. They work well.