SOLD STIHL 192 CARB

[JohnnyBlade]

Fits 192/192t from my reaseach. Was in a box. Took apart and pump/diaphragm looks good. The other flat diaphragm had a lil shape to it telling me its used. It was dry as a bone inside. Did the treemonkey test to it and it held 20psi of pop-off pressure on the mityvac. Has limiter on high side. Does it need a kit, i dont know cuz i dont have a saw to test it on, but i wouldnt think so based on other carbs i have opened on running saws. I just did what i knew how to do to perform some sort of test on it. Lets say $18 FnF or add 3%. Shipped to lower48.

 

[timg]

Let's say that's a helluva deal Nick. I assume you pumped up 5-6 psi on the fuel inlet fitting and it held the pressure to verify no needle/seat leakages. It won't last long at that price. Have a goodin!!

Sent from my XT1635-01 using Tapatalk

 

[JohnnyBlade]

Let's say that's a helluva deal Nick. I assume you pumped up 5-6 psi on the fuel inlet fitting and it held the pressure to verify no needle/seat leakages. It won't last long at that price. Have a goodin!!

Sent from my XT1635-01 using Tapatalk

Lol! "Lets say" is my way of saying OBO
But id say its priced right. And treemonkey says it needs to hold at least 15psi pop off pressure. This one is at 20psi wet. Thanks for the kind words Tim!

 

[timg]

Oh yeah, It's priced right and definitely not a leaker Mr. Nick. That's a good and always needed test even after parts replacements.

Sent from my XT1635-01 using Tapatalk

 

[JohnnyBlade]

Price reduced to sell.

 

[JohnnyBlade]

PRICE REDUCED IN ORIGINAL POST!!!

 

[DND 9000]

The carburetor you offer is a C1Q-S135 (part no. 1137 120 0602). Maybe you can write that on the box too, so that there is no confusion. The box has the C1Q-S285 written on it, that`s a other carb. The C1Q-S135 is used on the MS 192 TC.

 

[JohnnyBlade]

The carburetor you offer is a C1Q-S135 (part no. 1137 120 0602). Maybe you can write that on the box too, so that there is no confusion. The box has the C1Q-S285 written on it, that`s a other carb. The C1Q-S135 is used on the MS 192 TC.

Thats y i love this place! Thank u much Mr. DND! Something i totally over looked and was not aware of.

 

[Lightning Performance]

I'd call dibs but might have one in a box, new. Have to get those saws and sale a few maybe keep one if parts are cheap enough. One was used as a wheel chock. They came as a group. Be good to hand someone if needed. My 200Ts stay in my hand, no other.