WANTED Stihl 034 cylinder

[kkemp]

I'm looking for a 034 cylinder. Preferably 034 super or 036 , but would take the regular 46 mm as well . Thanks. .

 

[trooney]

I have a ported 034 cylinder if you want. Don't know who did the porting but it looks alright.

 

[jacktheripper]

I have a handful of 036 cylinders that I got from @singinwoodwackr. A couple of them could probably be saved

 

[Mad Professor]

I have NOS/OEM KS 46mm Stihl cylinder. Cylinder only. Pretty sure Meteor has pistons.

 

[dthieme]

I have both an 034 and an 034 super that I saved from our town dump. I know the piston was scored up pretty bad on one. I don't remember which saw it was but if I get the chance tonight I can check to see if the cylinders look ok.

 

[drf256]

If you get an 036/360 cylinder you have to trim the air dam under the front of the top cover. Just a reminder before you go nuts trying to fit the cover back on.

 

[Junk Meister]

If you get an 036/360 cylinder you have to trim the air dam under the front of the top cover. Just a reminder before you go nuts trying to fit the cover back on.

I have the 036 new to put on a 034 super. You more likely than not saved me some troubles. Just hope I retain this tidbit of info when needed.