WANTED Stihl 024 or 026

[kkemp]

I'm looking for a Stihl 024 or 026 , in decent condition. Thanks

 

[Paul Fithian]

PM me if you are interested in this one:

Thread 'Stihl West German O24 AV Restore / Upgrade to Ported 44mm'

Dec 23, 2022

Had a bit of fun, learned new things, and got to know some wonderful folks upgrading my vintage 024 AVS in this thread:
https://opeforum.com/threads/stihl-west-german-o24-avs-upgrade-to-44-7-bore.27703/

Decided to have another go at it to build a 16" saw with some leftovers from that upgrade. Received this dead 024 AV the other day from an eBay seller, built May 1986 in West Germany. Six months after the saw referenced above. Parts and fasteners are identical, for example slotted screws used in many places instead of Torx.


Cleaned up real nice...

• Paul Fithian
• Replies: 35
• Forum: Chainsaws

• 

 

[Jake Dykstra]

I'm looking for a Stihl 024 or 026 , in decent condition. Thanks

What's your price range. I have a couple nice ones.

 

[kkemp]

What's your price range. I have a couple nice ones.

I don't know if I have a price range really , depends on condition I guess. What you got ?

 

[59billy]

I don't know if I have a price range really , depends on condition I guess. What you got ?

Me, too.

 

[jacktheripper]

I will soon be building a pretty little 024 with an 026 top end on it. Will be for sale when I’m done.

 

[thesawisthelaw]

Stihl 024 AV, runs great, new carb Sept 23 - tools - by owner - sale - craigslist

024 AV that runs great and comes with bar and several chains. 9-6-2023 it received the most likely last brand new OE WT-426 carburetor at Hilliard lawn and garden along with a full tune up (air...

columbus.craigslist.org

might be in carmel IN next sunday unless they shut it down for the cold weather predicted...

 

[Paul Fithian]

I will soon be building a pretty little 024 with an 026 top end on it. Will be for sale when I’m done.

Check this thread if you are putting a 44 mm 026 cylinder/piston on an 024 AV

Thread 'Stihl West German O24 AV Restore / Upgrade to Ported 44mm'

Dec 23, 2022

Had a bit of fun, learned new things, and got to know some wonderful folks upgrading my vintage 024 AVS in this thread:
https://opeforum.com/threads/stihl-west-german-o24-avs-upgrade-to-44-7-bore.27703/

Decided to have another go at it to build a 16" saw with some leftovers from that upgrade. Received this dead 024 AV the other day from an eBay seller, built May 1986 in West Germany. Six months after the saw referenced above. Parts and fasteners are identical, for example slotted screws used in many places instead of Torx.


Cleaned up real nice...

• Paul Fithian
• Replies: 35
• Forum: Chainsaws

• 

 

[jacktheripper]

Check this thread if you are putting a 44 mm 026 cylinder/piston on an 024 AV

Thread 'Stihl West German O24 AV Restore / Upgrade to Ported 44mm'

Dec 23, 2022

Had a bit of fun, learned new things, and got to know some wonderful folks upgrading my vintage 024 AVS in this thread:
https://opeforum.com/threads/stihl-west-german-o24-avs-upgrade-to-44-7-bore.27703/

Decided to have another go at it to build a 16" saw with some leftovers from that upgrade. Received this dead 024 AV the other day from an eBay seller, built May 1986 in West Germany. Six months after the saw referenced above. Parts and fasteners are identical, for example slotted screws used in many places instead of Torx.


Cleaned up real nice...

• Paul Fithian
• Replies: 35
• Forum: Chainsaws

• 

Great thread! I was planning on just swapping the crank, but this may get more involved…