That's about the power I file for half the time not meaning to. Angles about like I put on that 6 cube chain and a touch lower raker.There is a fellow who wants me to make one for a piped 084..
Not really sure where to go with that one.
Anyone got suggestions?
It's hard to file a chain for a saw that you do not have.
There is a fellow who wants me to make one for a piped 084..
Not really sure where to go with that one.
Anyone got suggestions?
It's hard to file a chain for a saw that you do not have.
Were going to see how long a 25" loop of .404 lasts jmssaws
I absolutely hate squaring that stuff up .............I think picco sucked to convert to square
I wonder if a person could get away with a tick more top plate angle. ? 25 or 30 ish..Deep intersecting line and about 30 on the rakers. This is how I see it, let me see if this example helps, 084 would be like a 100 hp tractor right? Do you put a single bottom plow on a 100hp or 4 bottom plow 30 hp tractor?
.404 gets away with itI wonder if a person could get away with a tick more top plate angle. ? 25 or 30 ish..