Saw builds

[MustangMike]

Here it is

Both great saws, but that is kinda like comparing Mike Tyson to Roberto Duran!

 

[jmssaws]

Both great saws, but that is kinda like comparing Mike Tyson to Roberto Duran!

Roberto Duran was one of my favorites.
I wasn't comparing just playing.

 

[beaglebriar]

Here it is

Nice! I like em both but that 064 is a beast!

 

[jmssaws]

Nice! I like em both but that 064 is a beast!

This one is a beast

 

[Stump Shot]

Here is the first saw I did with 100% of the parts from HL Supply. It was nice to place just one order from just one vendor for everything. Wish more saws worked out like that. This Husqvarna 55 was rescued from saw abuse by its former owner, as it was straight gassed to an early death. Funny part was, a brand new spark plug resided in that burned up cylinder. Talk about beating a dead horse! It since has resumed firewood cutting duty with a new happy owner. So HL Supply this ones for you!

 

[jmssaws]

@Definitive Dave and hl supply are my main parts suppliers.

 

[Stump Shot]

@Definitive Dave and hl supply are my main parts suppliers.

Super Like.

 

[jmssaws]

I'm also building a couple psp saws,a 064 and a red light 066.
I guess just putting them together really,randy ported the 064 and the 066 is remaining stock. Got a pretty 660r arctic build coming also,lots of pretty saws

 

[Iron.and.bark]

Call me ignorant, but what the heck is "PSP"?!?

 

[Canadian farm boy]

Call me ignorant, but what the heck is "PSP"?!?

Ported Saw Polisher

 

[Onan18]

Ported Saw Polisher

 

[Onan18]

Ported Saw Polisher

Oops, we said it at the same time.

 

[MustangMike]

Ported Saw Polisher ... focus is on looks, not function. The term was coined on a previous site.

 

[Iron.and.bark]

Ported Saw Polisher

Thanks! From my early days in computer tech support in the 90's PSP = paint shop pro hence my confusion...

 

[MustangMike]

Hey, we just make it up as we go ....

 

[PA Dan]

I was impressed with how the last 272 I did ran,really good saw.
If your porting it I'll give you all I know on one.
I used out of the ordinary numbers and it worked very good.

Thanks Jason! Not really sure what I'm doing with it yet. Bought it to flip but didn't like a couple things and before I knew it the case was split and I was ordering parts. I'll see how it does stock and decide what to do. Still might be a flip or trade saw. Already have a couple that size and really like the other colors better![emoji6]

 

[madhatte]

I think I might see about fitting an 038 mag jug on an 034.

I know it's been done with an 036/038 awhile back. I coughed up some parts for that build. I can't remember who did it but I remember he was in VA and called it an "037".

 

[drf256]

I think I might see about fitting an 038 mag jug on an 034.

Which piston will you be using?

IIRC, the 036 has a 10mm pin and the 038 a 12mm pin.

 

[Brewz]

I got a couple of 2100's that are getting ported, larger carbs with v-stacks installed.

I am building up a 2100CD at the moment.
I would be VERY interested to know what larger carb you plan to fit, and also a source of V Stacks as the filter bolt holes are wider than the Walbro carbs.

Please feel free to add as much info as you can to the 2100 thread I have started

http://opeforum.com/threads/husqvarna-2100-thread.2740/

 

[srcarr52]

I am building up a 2100CD at the moment.
I would be VERY interested to know what larger carb you plan to fit, and also a source of V Stacks as the filter bolt holes are wider than the Walbro carbs.

Please feel free to add as much info as you can to the 2100 thread I have started

http://opeforum.com/threads/husqvarna-2100-thread.2740/

I'll make the v-stack and use a WJ-39 or WJ-70 from a Husky 394. I did a build thread on one a long time ago on sawhawgz.

http://sawhawgz.com/showthread.php/1642-Huscarrvarna-2100CD?highlight=2100+huscarrvarna