Saw builds

[jmssaws]

Mike, I have an 660 clone on the way, and will be doing vids for that and a clone 372 asap.

I don't intend on keeping the 660, because I cannot seem to find enough room for all the parts for all the saws that I have. I'm consolidating here soon, and will maintain only a few models. 350, 262, 372 and 394. i think that'll cover me

Don't pass judgment on a 660 from a Chinese clone.

 

[dall]

Don't pass judgment on a 660 from a Chinese clone.

you need to understand that matt sleeps with his huskies and dont know what a good saw is and the chinese clones are not the quality of a oem

 

[X 66 stang347 X]

Don't pass judgment on a 660 from a Chinese clone.

That's true. I put one together to see how it stacked up. They have their issues and after I worked through them it's a good running saw but no 660. And from the start get a good handle. The AM bends easy

 

[jmssaws]

you need to understand that matt sleeps with his huskies and dont know what a good saw is and the chinese clones are not the quality of a oem

Sleeps with or "sleeps" with?

 

[jmssaws]

That's true. I put one together to see how it stacked up. They have their issues and after I worked through them it's a good running saw but no 660. And from the start get a good handle. The AM bends easy

I believe that the clone is a pretty decent saw,I'm looking forward to playing with one

 

[X 66 stang347 X]

I was surprised how solid the bottom end was. The whole thing went together fine. Just a few things didn't work as smooth. And there is a little more vibration than I'm use to compared to Stihl

 

[jmssaws]

I built a 460 with a entire aftermarket bottom end that has over a milliion feet on it without incident.
Strong ported cylinder on it

 

[jmssaws]

Here's a transfer on the 034

 

[Mattyo]

I can't sleep with my saws. They are all with jason...maybe he's sleeping with them?

 

[Time's Standing Stihl]

I can't sleep with my saws. They are all with jason...maybe he's sleeping with them?

He is a hoe like dat

 

[X 66 stang347 X]

Don't let them Lonely huskies get near your Stihl's

 

[Mattyo]

you afraid those creamsickles will have babies that are more orange?

 

[jmssaws]

I gotta work on the carb on the 034,I can't get it lean enough. Low is almost shut
It's very fat and got to much chain.

 

[RI Chevy]

Nice.

 

[drf256]

I gotta work on the carb on the 034,I can't get it lean enough. Low is almost shut
It's very fat and got to much chain.

Is it a Zama and which air filter?

 

[jmssaws]

Is it a Zama and which air filter?

Zama
It has no airfilter in the video.
Barely runs with it on

 

[drf256]

Some of those Zama's feed the H circuit both fixed and adjustable.

I had the same issue once.

Toss a filter on it. See what happens

 

[jmssaws]

Been down sick and just now getting back to the shop, anybody got a cool build going?

I finally ran out of dolmars to port so I'm on to a 260,361,362 and a 661.

What's everybody grinding on?

 

[Deets066]

I wish I was home puttin a coil in the solo

 

[jmssaws]

I wish I was home puttin a coil in the solo

Damn coils anyway