RAFFLE: AdirondackStihl Surgery Fund. Raffle ends on Monday, April 2, 2018.

[dahmer]

No lol I believe I spot a Allen bradley endcoder

I have a David Bradley, it doesn’t look like that.

 

[leadfarmer]

You bringing that new saw to East Freedom on April 14 for the charity firewood cutting?

Didn't here anything about that yet but sounds like a good time.

Sent from my SM-G900V using Tapatalk

 

[Dub11]

Hey guys....can we at least try to back off on the pointless / irrelevant banter? This thread is tough to follow as it is.

Post deleted

 

[USMC615]

No lol I believe I spot a Allen bradley endcoder

...black one?

 

[T.Roller]

...black one?

Large gray box on its side at the bottom

 

[USMC615]

Large gray box on its side at the bottom

Gotcha. Alright back to the raffle for these gents.

 

[T.Roller]

Better hush up or we'll have a blown fuse here lol ........

 

[Fruecrue]

I have a David Bradley, it doesn’t look like that.
View attachment 119029

Is the chain on backwards?

 

[Cwn877]

Didn't here anything about that yet but sounds like a good time.

Sent from my SM-G900V using Tapatalk

Me either

 

[Dub11]

Is the chain on backwards?

Helper handle?

 

[Stump Shot]

Look at that PLC clusterphuck...kinda like a woman, start fingering and pulling and yanking on chit! Lol

No wonder she left. Lol

 

[dahmer]

Is the chain on backwards?

Old guy had it 40 years and sold it because he finally got tired that it didn’t cut good. lol

 

[Fruecrue]

Helper handle.

Thought it was an electric joint

 

[paragonbuilder]

Hey guys....can we at least try to back off on the pointless / irrelevant banter? This thread is tough to follow as it is.

Bump

 

[GCJenks204]

Okay let's try and keep this moving...

#6....... @Nathan lassley

#7........ [USER=1]@Gentleman

#8......Matt Brinkley

#9....... @166

#10....... @Moparmyway

#11....... @GCJenks204

#12....... @Red97

#13........ @NCFarmboy

#14......... @Roadfxr

#15......... @nixon

@Nathan lassley Your turn to select...

Here is the updated list of prizes (original numbers).

1) Vintage McCulloch Sharpening jig and a Homelite410 filing vise from @Mastermind



3) Winner gets a set of their crankcases powdered by Glock37 from @Glock37

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from @166

5) Port Job from @huskihl

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Poulan PRO 330 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from @Dub11

10) Vintage John Deere saw from @Deets066

11) Custom Tuned Pipe from @spencerpaving.

12) Woods Port from @tree monkey

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from @Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples



16) Chainsaw Repair Tool Set from @Definitive Dave

17) JMS Ported 064/066 from @Miller Mod Saws and @hseII

18) Timberline Sharpener from @ny15

19) A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper

20) A VERY NICE Stihl 028 Super from @SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from @USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave



25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill

32) Crank tool kit from @Mattyo

33) Kit saw of the winners choice from Hl Supply from @Gentleman

34) A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev

35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from @166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from @166

37) A Regulator (great for finding leaks) from @psuiewalsh

38) A made in USA Oregon 28" D009 mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from @psuiewalsh

39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from @Stump Shot

40) A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from @Time's Standing Stihl

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from @166

44) Homelite410 filing vise from @Homelite410

45) Brand New OEM Husqvarna 576 Full Wrap Handle Kit from @Moparmyway

46) New in box 12" Stihl 3/8p .050 bar and 5x 12" 63pm chains, non safety (great combo for a MS 200 T) from @treesmith

47) New in box OEM Husqvarna 346xp ne piston and cylinder kit from @treesmith

48) Husqvarna chainsaw bag from @ajschainsaws

49) N.O.S. Husqvarna 262 XP three shoe clutch assembly from @NCFarmboy



51) Dolmar/Makita 030-132-000 49mm fits 6800I from @NCFarmboy

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diff suffix 01 vs 71 from @NCFarmboy

53) Husqvarna 503-1687-71 fits 55 CP from @NCFarmboy

54) Orange Gen III Two Idiots Logging XL T Shirt from @166

55) Black Gen III Two Idiots Logging XL T Shirt from @166

56) Freshened up and woods ported 034/036 hybrid with upgraded clutch drum and bearing as well as a metal mesh filter from @Canadian farm boy



58) A pair of Sip Security pants, size is 38-35" waist with 32" length from @CapitaineHaddoc

59) A nice little wood splitter axe/wall hanger with a vintage craftsman head and hickory 28” handle. My father makes them as a hobby and we wanted to donate it from @huskyboy

60) Walbro HDA 87 for a Husqvarna 262 XP from @CJ Brown

61) Brand new Oregon 18" K041 bar and two chains from @dahmer

62) N.O.S. Husqvarna 257 Cylinder kit from @NCFarmboy

63) New Husqvarna small mount bar K095 24” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

64) Winner gets a set of their crankcases powdered by Glock37 from @PA Dan

65) New 28" .050 Gauge 91 DL Stihl Rollomatic ES bar in 3003 mount (D025) from @jacob j.

The prizes that have been selected are:

1. 166
2. 394
3. 6100
4. 346
5. 257[/USER]

 

[GCJenks204]

I’m in bed men, mayhaps the list could be updated to show what prize was picked by whom ?

Who grabbed the 394 ported by me ?

I’ll be up early if I’m picking

@longleaf is the lucky man that picked your saw.

 

[Lee H]

Holy chit man, Haven't checked this thread in a few days and it has gone nuts.
Forgot April 2 was the drawing.
How come I got's no alerts. Gotta have a long talk with the manager.

Good luck to all the winners and get yo puss out and healin Jer.

Looks like a gotta bring that stupid 166 ta New Yock. I might not have
room for it.

 

[Bilge Rat]

Just send that 166 to Georgia for testing.
Me and Heath will fit it with a B&C and run tests on 2 different large oaks. Document the performance and send it on to the owner.

What could be better, a new saw with performance documentation .

 

[hseII]

Yeah we still run across old motor control cabnits like that full of contactors and relays.

We installed a reconditioned Morgan 310t bridge crane @ SSAB one summer.

It was originally built while Truman was in the Whitehouse.

All DC & everything Big as Chit.

 

[p61 western]

Okay let's try and keep this moving...

#6.......Nathan Lassley

#7........ @Gentleman

#8......Matt Brinkley

#9....... @166

#10....... @Moparmyway

#11....... @GCJenks204

#12....... @Red97

#13........ @NCFarmboy

#14......... @Roadfxr

#15......... @nixon

@Nathan lassley Your turn to select...

Here is the updated list of prizes (original numbers).

1) Vintage McCulloch Sharpening jig and a Homelite410 filing vise from @Mastermind



3) Winner gets a set of their crankcases powdered by Glock37 from @Glock37

4) Makita XPH12 18V LXT Brushless hammer drill. Will include one 4.0 Ah Battery and charger. from @166

5) Port Job from @huskihl

6) New 20" Husqvarna Large Mount Bar and Square Ground chain from @dustinwilt68

7) Poulan PRO 330 from @Sleeper

8) BRAND NEW Stihl 25" 84DL LIGHT bar from @GCJenks204

9) Six Pack of 2.5 Gallon Red Armor Mix oil with shipping to the winner from @Dub11

10) Vintage John Deere saw from @Deets066

11) Custom Tuned Pipe from @spencerpaving.

12) Woods Port from @tree monkey

13) Brand new Husqvarna 372 Full Wrap handle from @TreeLife AND a set of new oem west coast spikes from @Czed

14) N.O.S. Husqvarna 262 XP top end from @lwhaples



16) Chainsaw Repair Tool Set from @Definitive Dave

17) JMS Ported 064/066 from @Miller Mod Saws and @hseII

18) Timberline Sharpener from @ny15

19) A case of 12 quarts of AMSOIL Saber synthetic mix from @Wood Chopper

20) A VERY NICE Stihl 028 Super from @SOS Ridgerider

21) Brand New Performance Tools T-Handle sets in SAE, Metric, and Torx from @USMC615

22) 1 pair of work gloves, 1 pair of Oregon Braces, 1 chainsaw filing set, and 1 single person first aid kit from @ajschainsaws

23) Winner's choice of a CCC Racing 346xp NE 44.3mm pop-up performance OR race flat top piston made for us by Wiseco. Both have a 1mm chrome faced Japanese steel ring centered on the intake with patented go-fast technology and patent pending never-lose additives This offer not open to anyone who shouts "Team Stihl" at a wedding or baptism. from @Definitive Dave



25) NEW Sugi Hara Lightweight 32" 3/8 .063 Gauge in 3003 Stihl mount (D025) from @Roadfxr

26) NEW 20" Total Super Bar (TsuMura) 3/8 .050 Gauge in D009 mount from @Dolmar Junkie

27) Box of 044/440 parts, includes 12mm Stihl cylinder, It has a scratch that can be felt, but the saw ran great and had good power, aftermarket piston, oem piston wrist pin, oem bearing (I think) c clips, AV bushings,some rubber pieces, nice after market 440 tank, oem bearing spacer, oem handle, good running Hong Kong Zama carb, muffler base, oem badges, oem brake flag, ans a set of Glock37 powder coated spikes with hardware and chain catcher from @Backtroller

28) Gamn carbide sharpener with two burrs and literature from @Tpagel

29) A dozen BEAUTIFUL hand tied Trout Flies from @Adirondackstihl

30) Makita 47 Pc. Ratchet and Bit Set from @166

31) Hand forged set of draw knives, one curved and one straight, made by none other than the legendary Scotty Overkill himself! from @Scotty Overkill

32) Crank tool kit from @Mattyo

33) Kit saw of the winners choice from Hl Supply from @Gentleman

34) A case (24) of Tanaka Perfect Mix 6.4oz bottles from @PissRev

35) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (1 of 2) from @166

36) A brand new 18" .325 .063 74DL Bar and Chain setups in Stihl mount. Bar is the same as an Oregon Prolite (2 of 2) from @166

37) A Regulator (great for finding leaks) from @psuiewalsh

38) A made in USA Oregon 28" D009 mount in 3/8 .050 includes a used Stihl chain that has been converted to square ground from @psuiewalsh

39) A SWEET vintage Husqvarna labeled Windsor bar 16" 3/8 .058 60 DL from @Stump Shot

40) A BEAUTIFUL Homelite410 custom Engine Turned 3/8 .050 Gauge 84 DL Stihl bar from @Time's Standing Stihl

41) Oregon 5/32 sharpening kit, includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (1 of 2) from @166

42) Oregon 3/16 sharpening kit includes round file with guide, flat file, handles, raker gauge, bar grove cleaner, and measuring gauge (2 of 2) from @166

43) 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from @166

44) Homelite410 filing vise from @Homelite410

45) Brand New OEM Husqvarna 576 Full Wrap Handle Kit from @Moparmyway

46) New in box 12" Stihl 3/8p .050 bar and 5x 12" 63pm chains, non safety (great combo for a MS 200 T) from @treesmith

47) New in box OEM Husqvarna 346xp ne piston and cylinder kit from @treesmith

48) Husqvarna chainsaw bag from @ajschainsaws

49) N.O.S. Husqvarna 262 XP three shoe clutch assembly from @NCFarmboy



51) Dolmar/Makita 030-132-000 49mm fits 6800I from @NCFarmboy

52) Jonsered 503-1687-01 fits 590 haven't measured but they look the same just diff suffix 01 vs 71 from @NCFarmboy

53) Husqvarna 503-1687-71 fits 55 CP from @NCFarmboy

54) Orange Gen III Two Idiots Logging XL T Shirt from @166

55) Black Gen III Two Idiots Logging XL T Shirt from @166

56) Freshened up and woods ported 034/036 hybrid with upgraded clutch drum and bearing as well as a metal mesh filter from @Canadian farm boy



58) A pair of Sip Security pants, size is 38-35" waist with 32" length from @CapitaineHaddoc

59) A nice little wood splitter axe/wall hanger with a vintage craftsman head and hickory 28” handle. My father makes them as a hobby and we wanted to donate it from @huskyboy

60) Walbro HDA 87 for a Husqvarna 262 XP from @CJ Brown

61) Brand new Oregon 18" K041 bar and two chains from @dahmer

62) N.O.S. Husqvarna 257 Cylinder kit from @NCFarmboy

63) New Husqvarna small mount bar K095 24” 3/8 .058 84 DL replaceable sprocket nose. Has a scratch here and there from storage but never used from @Greg Newman

64) Winner gets a set of their crankcases powdered by Glock37 from @PA Dan

65) New 28" .050 Gauge 91 DL Stihl Rollomatic ES bar in 3003 mount (D025) from @jacob j.

The prizes that have been selected are:

1. 166
2. 394
3. 6100
4. 346
5. 257

Where is this Nathan fella?