FOUND IT Oem ulimited coil for 359...

[PA Dan]

I'm going to be needing one of these. If you have an extra let me know.

Dan

 

[huskihl]

Same coil fits a 350, which is unlimited. Oodles of them out there for cheap on ebay

 

[PA Dan]

Same coil fits a 350, which is unlimited. Oodles of them out there for cheap on ebay

Thanks Kevin I'll take a look!

 

[Josh0619]

20-$25 on eBay

 

[J.Walker]

I thought that the 359/ 2159 saws had black coils to begin with.

 

[old guy]

Yup, mine do

 

[PA Dan]

I was told the one I have coming has a blue coil on it...

 

[huskihl]

That's out of a ne 346
Probably fine if you're not porting it

 

[PA Dan]

That's out of a ne 346
Probably fine if you're not porting it

It will be ported....[emoji16]

 

[RIDE-RED 350r]

The 359 he is getting is coming from me. The blue coil is out of my 372 XPW. It was fine with it the way I had the saw set up with just a BG delete.... But, Dan wants me to port the cylinder once it gets back from getting the base and squish cut so the blue 13.3k coil just won't do if it runs anything remotely similar to my ported 357!

Dano: I'm going to get a black coil for you. You have been more than patient with me between the setbacks I've had with the saw and work keeping me away from the saw bench or just too pooped to pop when I finally get home. Is a used OEM coil OK or would you prefer new OEM? I won't use AM coils, I've heard too many reports of hit and miss functionality and longevity. Just let me know and I'll make it happen, least I can do.

 

[RIDE-RED 350r]

Go ahead and edit your thread title to "Found" Dan. I have a black coil on the way

 

[PA Dan]

Go ahead and edit your thread title to "Found" Dan. I have a black coil on the way

Wait...what?

 

[RIDE-RED 350r]

Wait...what?