NSP2. Cuz PA WiFi sucks

[leadfarmer]

64 drivers are irritating.


Get them cups cleaned up?

They gone.......

 

[Lightning Performance]

What's the long one up top Ken?

It up, ha.

What one the Stihl 28" or the 24 Homelite?

 

[beaglebriar]

It up, ha.

What one the Stihl 28" or the 24 Homelite?

Must be the 28. What gauge?

 

[USMC615]

No cold air intake. My buddy has one and it's kinda noisy.

Def hear a difference in noise in the cab with the ‘throatiness’ of the cold air intake to the manifold when you get heavy on the pedal.

 

[Dub11]

Buy a stronger saw

Pfft I run true 18" bars, 68dl

 

[Lightning Performance]

Must be the 28. What gauge?

Duno. Let me check the actual bar. That one is a useable Sandvik Windsor tips on them. the 20" is about worn out but looks cool. It needs serious rail work with a big file, both. Sprockets are about worn out on both. Dragging the chain on the nose. The 28" can be saved. It's a rigid piece of steel.
It's straight, tight rivets and it is straight. Large oil hole.
Old bar no doubt

Made in the USA.
SWD30R
U106916
28 40 50 ST
D025 mount 3003
0.050 gauge
STA-375
3/8P

It appears to have never had a plug in the hole, ymmv

 

[hoskvarna]

It's hell on gas as it is.

That why I gets a diesel
20-22mpg daily driving [emoji106]


Sent from Hoskey Hills

 

[Lightning Performance]

Must be the 28. What gauge?

Upon further inspection it looks like some dick tried to start cleaning it up with the Dremel, tool.... didn't do any damage to anything yet. It will oil and work as intended. Needs love.

 

[Cat 525]

Got some walnut out today! Plenty wet but rolling!

 

[p61 western]

That why I gets a diesel
20-22mpg daily driving [emoji106]


Sent from Hoskey Hills

This lol

 

[beaglebriar]

That why I gets a diesel
20-22mpg daily driving [emoji106]


Sent from Hoskey Hills

My buddies newer Cummins doesn't do any better than my Hemi around town. I'm sure it's a little better towing but it doesn't sip fuel like the old 12 valve.

 

[beaglebriar]

Upon further inspection it looks like some dick tried to start cleaning it up with the Dremel, tool.... didn't do any damage to anything yet. It will oil and work as intended. Needs love.

Was hoping it was .063 to convert to .404

 

[exSW]

Was hoping it was .063 to convert to .404

So,you're out? If it's 3003 .050 28" I may be interested.
@Lightning Performance

 

[beaglebriar]

So,you're out? If it's 3003 .050 28" I may be interested

All yours.

 

[Lightning Performance]

I'll go hang it on that 362C wif a loop and see how far gone the bar is.

 

[Lightning Performance]

Zeh plot thinkens.
It won't take a loop of a2ep, anywhere.
I'll hang it

 

[Lightning Performance]

Sitting on the treesixty toofFin DJ saw

 

[Dub11]

^^^^^Thread killer^^^^^^^^

 

[huskihl]

@DuratecMan10 View attachment 218592

Best answer

 

[Dub11]

Best answer

Maybe if it was a Ponchos taco.