NSP2. Cuz PA WiFi sucks

[P.M.P.]

 

[Lightning Performance]

Do everyone of these after market oil pump worm gears for Stihl, 1135, 1128 and 1122 from Ebay or HLS have a built in fail?

Now I tried them in old oe 66's. Fail
Tried them in modded 1122 oe pumps. Two foot mill cut, fail.
Gave up.
Tried an oe 046 fail, first run.
Tried a new AM 460 pump and gear. Fail, zero engagement
Tried one in a 362 win, no problems
Tried another same, my work saws.
361 win no problems, twice. Ran them for years.
Fresh 361 today. New AM pump and gear, the better ones from HLS, fail, ate the gear. Pumped zero ccs. Pump is fine.

Wtf...
Time to give up AM gears and 460 AM pumps?...

Had zero issues with AM pumps. They lack volume most times and it's not an issues on 20" worksaws. Most commercial guys prefer oem anyway. I don't send AM stuff to loggers or tree crews so I'm really the only feedback I have on them. Sent out two ... 361 and 362 with them. Heard nothing back. Both oem pumps.

Help a guy out and tell me I'm spot on and to just stop testing AM gears in any of them. I do my best... it was all lubed up to. Shredded Wheat now... pulled the pump off with the oil cap still on and it spewed oil everywhere... just to be sure. Cycled the pump in my hand, it's fine. This saw was just put back together.
Lucky none of this stuff ever sees the street in saws going out.

Had zero issues with Hyway clutches and clutch springs... broke just as many as oem springs in my saws. Not many but a few. They break relatively quick after being installed, always just one

 

[DuratecMan10]

You're only hurting yourself here son.

But it's the troof... Ask my girlfriend!


Sent from my iPhone using Tapatalk

 

[DuratecMan10]

Lmao!


Sent from my iPhone using Tapatalk

 

[P.M.P.]

Do everyone of these after market oil pump worm gears for Stihl, 1135, 1128 and 1122 from Ebay or HLS have a built in fail?

Now I tried them in old oe 66's. Fail
Tried them in modded 1122 oe pumps. Two foot mill cut, fail.
Gave up.
Tried an oe 046 fail, first run.
Tried a new AM 460 pump and gear. Fail, zero engagement
Tried one in a 362 win, no problems
Tried another same, my work saws.
361 win no problems, twice. Ran them for years.
Fresh 361 today. New AM pump and gear, the better ones from HLS, fail, ate the gear. Pumped zero ccs. Pump is fine.

Wtf...
Time to give up AM gears and 460 AM pumps?...

Had zero issues with AM pumps. They lack volume most times and it's not an issues on 20" worksaws. Most commercial guys prefer oem anyway. I don't send AM stuff to loggers or tree crews so I'm really the only feedback I have on them. Sent out two ... 361 and 362 with them. Heard nothing back. Both oem pumps.

Help a guy out and tell me I'm spot on and to just stop testing AM gears in any of them. I do my best... it was all lubed up to. Shredded Wheat now... pulled the pump off with oil cap still on and it spewed oil everywhere... just to be sure. Cycled the pump in my hand, it's fine. This saw just put back together.
Lucky none of this stuff ever sees the street in saws going out.

Had zero issues with Hyway clutches and clutch springs... broke just as many as oem springs in my saws. Not many but a few. They break relatively quick after being installed, always just one

Sell your stihls buy huskys problem fixted.

 

[Lightning Performance]

Sell your stihls buy huskys problem fixted.

*f-worder. Your zero help, so gfy.

 

[DuratecMan10]

Is this a @Stump Shot creation?

 

[Stump Shot]

Do everyone of these after market oil pump worm gears for Stihl, 1135, 1128 and 1122 from Ebay or HLS have a built in fail?

Now I tried them in old oe 66's. Fail
Tried them in modded 1122 oe pumps. Two foot mill cut, fail.
Gave up.
Tried an oe 046 fail, first run.
Tried a new AM 460 pump and gear. Fail, zero engagement
Tried one in a 362 win, no problems
Tried another same, my work saws.
361 win no problems, twice. Ran them for years.
Fresh 361 today. New AM pump and gear, the better ones from HLS, fail, ate the gear. Pumped zero ccs. Pump is fine.

Wtf...
Time to give up AM gears and 460 AM pumps?...

Had zero issues with AM pumps. They lack volume most times and it's not an issues on 20" worksaws. Most commercial guys prefer oem anyway. I don't send AM stuff to loggers or tree crews so I'm really the only feedback I have on them. Sent out two ... 361 and 362 with them. Heard nothing back. Both oem pumps.

Help a guy out and tell me I'm spot on and to just stop testing AM gears in any of them. I do my best... it was all lubed up to. Shredded Wheat now... pulled the pump off with the oil cap still on and it spewed oil everywhere... just to be sure. Cycled the pump in my hand, it's fine. This saw was just put back together.
Lucky none of this stuff ever sees the street in saws going out.

Had zero issues with Hyway clutches and clutch springs... broke just as many as oem springs in my saws. Not many but a few. They break relatively quick after being installed, always just one

Just think of all the money you would have right now if you just bought a real part in the first place.

 

[Stump Shot]

Is this a @Stump Shot creation?
View attachment 241975

I don't think so Tim.(in my best Al Borlin voice)

 

[P.M.P.]

Just think of all the money you would have right now if you just bought a real part in the first place.

Yeah really OEM Mfer...

 

[Stump Shot]

View attachment 241974

So that's your secret to catching fish. Lol

 

[jacob j.]

Yep. Ceilings not getting done. Its that damn popcorn, and I aint messing with that right now.

Using Kilz 2 for primer. Behr ultra P+P in eggshell for top coat.

It's obvious, but make sure you wear a respirator if you're spraying Kilz. A local guy destroyed about 80% of his lung function by spraying Kilz without a respirator. He
ended up having to have a kidney transplant later on.

 

[Stump Shot]

Yeah really OEM Mfer...

You tell him, I'm too damn tired.

 

[DuratecMan10]

I don't think so Tim.(in my best Al Borlin voice)

Well damn. Who made it then?!


Sent from my iPhone using Tapatalk

 

[Woodpecker]

GFY hater! I'm straight, my girlfriend laughed when I showed her my pee pee

 

[Lightning Performance]

So your saying you never tried. Fair but again, no help really.

They sell them and I know people use them. I did for years without issues. It seems these clear plastic jobs are just under size a bit 0.015. It just started with the last years orders. Bad batch maybe idk.

A price point for everything and you know that. If I want the oem talk I'll ask for it. Trying to figure out a problem not hear the preacher.

 

[Stump Shot]

So your saying you never tried. Fair but again, no help really.

They sell them and I know people use them. I did for years without issues. It seems these clear plastic jobs are just under size a bit 0.015. It just started with the last years orders. Bad batch maybe idk.

A price point for everything and you know that. If I want the oem talk I'll ask for it. Trying to figure out a problem not hear the preacher.

Never said I didn't try them, my lesson learned was not to fark with 'em, take it how you want.

 

[P.M.P.]

Dam failed
Nice city of Midland MI is under 9 feet of water
Sukage

 

[P.M.P.]

Never said I didn't try them, my lesson learned was not to fark with 'em, take it how you want.

OEM Mfer

 

[Woodpecker]

Dam failed
Nice city of Midland MI is under 9 feet of water

Yep it's a royal chit show on top of the chit show already going on. Really sad.