NSP2. Cuz PA WiFi sucks

[Lightning Performance]

I know its easier said then done, take it a tad easy tomorrow.
Milling aint a good thing with your shoulder damage buddy

The mill needs a throttle control and exhaust pipe anyway. Should finish them first. I'm not running that monster sled but three cuts maybe four later this week. Using the 36" mill mostly. Need to fab up a beam cutter for the CS670. Still have to unload all that maple on the trailer tomorrow night but no worries, I'll use the forklift.

 

[Dub11]

Afternoon gents

 

[Dub11]

What kind of forklift you got?

 

[Lightning Performance]

What kind of forklift you got?

Old 58' Hyster LP flathead beast with fat 40's" on the front. Don't go near soft ground with it. Six inch clearance.

 

[Dub11]

Old 58' Hyster LP flathead beast with fat 40's" on the front. Don't go near soft ground with it. Six inch clearance.

I wanna talk my boss out of this
It came with some other equipment they bought last year. Needs some brake work done. It's a flathead too.

 

[Czed]

@beaglebriar
Paul said this is the fastest damn cutting saw
He's ever seen.had to hinge it away from a cattle cage.runs great 4 tanks through it now
I handfiled the archer cut's a lot better now.
they're dedicating a bridge in millwood wv
Friday
To his friend and after the war his bil who was kia in korea in 1953
George arthur roush.

 

[Czed]

I hope its not needed, but after I'm done stripping the wall totally I gone get a pro to inspect the wall construction system.
It could be worse, but it aint 100% perfect, my plan is to let it dry for a couple weeks (there is just one bearing straw who need it and that one had absolutly no damage), and take it from there. I got no plan to close the wall until I'm 100% sure its ready for it.
I'll shot some pictures soon Dave, you will be shocked to see what isolation materiale they used back in late 1800's

1/3 stripping done, slowly we're heading for the big issues

a damaged shoulder take long time to cure buddy, be patience my friend

They built house's on sandstone block's here tor
Worked on many that had sunk flush with the ground.
Only insulation if there was any was 1900s
Newspaper's or catalog page's
Hopefully it looks worse than it is.

 

[cuinrearview]

Evenin' all. The water stopped at the GF's house during her shower this morning, few hours after I left. I tried to troubleshoot from work. She ended up calling a few well places but nothing tonight. We decided to come up to the lake and grill pork and chicken, and boil some tiny corn since the roadside stands are way behind this year. The well thing sucks but the lake is gorgeous tonight. Supper on the deck...

 

[Lightning Performance]

I wanna talk my boss out of this View attachment 192128 View attachment 192129
It came with some other equipment they bought last year. Needs some brake work done. It's a flathead too.

They are so handy. Been spoiled for twenty plus years with this one. Old relics lost the brakes, again. Steering is week and one tilt-back cylinder leaks now. Z pipe rotted off, loud mfer.

 

[p61 western]

Good evening fellas.

 

[Dub11]

Good evening fellas.

Mill anything else today?

 

[p61 western]

Mill anything else today?

Yep and hit more fugging nails. Filing the chain right now.

 

[Dub11]

Yep and hit more fugging nails. Filing the chain right now.

So I take it that the previous owner let the kids run wild with a coffee can of nails for hours on end?

 

[p61 western]

So I take it that the previous owner let the kids run wild with a coffee can of nails for hours on end?

That or there was barbed wire here at some point. It seems to be a group of 3 like it. I'm about tired of filing for awhile lol. Time to get a metal detector.

 

[Dub11]

That or there was barbed wire here at some point. It seems to be a group of 3 like it. I'm about tired of filing for awhile lol. Time to get a metal detector.

Switch to some .404 carbide........

 

[Dub11]

Maybe it was a bear fence?

 

[Czed]

That or there was barbed wire here at some point. It seems to be a group of 3 like it. I'm about tired of filing for awhile lol. Time to get a metal detector.

Mike cut as close to the ground as possible
Then block and cut 6-8-10 whatever ft your after.
Look for blue/purple or black streaks
That's how we find metal usually.
The ash today was clean i blocked it at 8ft first.

 

[Philbert]

Need to figure out this Tecomec jolly star pro hydro, I think.
Has two more setting than my belsaw basic model.
Vids, links, @Philbert

See attached.

Philbert

 

[Czed]

Perks of farm country and good neighbors

Here's that poplar he wants down
the shed fell against it
He wants to save it since its so pristine
He has 12 barns/sheds.

 

[Czed]

Yep and hit more fugging nails. Filing the chain right now.

#chinachain