not so pros

[Czed]

Good afternoon guy's

 

[Dolmar Junkie]

I found a nice 281 cylinder and a non decomp 288 those are fun
Talk to you later.

Roger,Roger....

Fail
It should be setting on the stump
Of a tree you dropped

Actually if you knew how hard those 7" oak timbers that it's on in one pic, you would be really impressed. Like a diamond cuts evrrything due to its hardness,that oak that I milled in probably 2008 or 9 is what's used to cut Australian Hardwoods,these generally require a concrete saw, but this one sail's thru it like butta... I do always have to find one of my chains that I didn't lower the depth guages will my 4.5" grinder, unless you enjoy your teeth rattling...

 

[leadfarmer]

Good morning Rodney

Howdy friend. heading for lunch now

Sent from my SM-G900V using Tapatalk

 

[Time's Standing Stihl]

Howdy friend. heading for lunch now

Sent from my SM-G900V using Tapatalk

You buying?

 

[Czed]

Anybody here or know of anyone
Milling with the china 660s
My friend fried his ms390 lol
Milling
I have told him what to replace with oem

 

[Dolmar Junkie]

Anybody here or know of anyone
Milling with the china 660s
My friend fried his ms390 lol
Milling
I have told him what to replace with oem

390 Husqvarna or Stihl?

 

[Czed]

390 Husqvarna or Stihl?

Steel

 

[P.M.P.]

Anybody here or know of anyone
Milling with the china 660s
My friend fried his ms390 lol
Milling
I have told him what to replace with oem

Kevin @huskihl might have given it a whirl once.

 

[czar800]

Any of you NSP’s happen to have a air filter cover for a MS 290?

It’s not for show, so I’m interested in just about anything.

 

[Sty57]

Hoarder!

If you test one, will the price go up?

 

[Dolmar Junkie]

Steel

Well I apologize in advance,
But he deserved it! I'm kidding, cause I milled quite a few post mainly Eastern Red Cedar with a 540and a mini mill , building stalls in the middle of nowhere. I've never been impressed much with a three 9zeroS , never saw a ported one though...

 

[Dolmar Junkie]

View attachment 109705

Ahh, the warranty naxi! Put that muffler up before he sees us...

 

[hoskvarna]

Good morning Mark

Evening Todd


Sent from Hoskvarna Hills

 

[hoskvarna]

Well figured out what has been keeping me down lately.

Have a tooth that needs a root canal, specialist lost the referral so I have been waiting a month. The tooth is infected and that spread to my sinuses. Will pick up some antibiotics later and hopefully that gets me around the corner.

Them teeth can make you mighty sick [emoji40]
Gws


Sent from Hoskvarna Hills

 

[Jon1212]

Well I apologize in advance,
But he deserved it! I'm kidding, cause I milled quite a few post mainly Eastern Red Cedar with a 540and a mini mill , building stalls in the middle of nowhere. I've never been impressed much with a three 9zeroS , never saw a ported one though...

Well, now you have.....

Nothing is random.

 

[Stump Shot]

Anybody here or know of anyone
Milling with the china 660s
My friend fried his ms390 lol
Milling
I have told him what to replace with oem

Mustang Mike

 

[Dolmar Junkie]

View attachment 109708
Well, now you have.....

Nothing is random.

It is very purdy, I tried to write that in code so y'all and those robots wouldn't know and put me on a list.
My excuse is that the one that I have any actual more than60 sec worth of experience was a brand new prolly not broke in against a brand new 6401 that was probably tuned a little better, (cause I didn't do it) so not my fault, just my opinion! So send me that saw for proper evaluation and torture testing protocols to be performed at our state of the art facility, I can't write any more characters! You Win,Damnit

 

[Dolmar Junkie]

It is very purdy, I tried to write that in code so y'all and those robots wouldn't know and put me on a list.
My excuse is that the one that I have any actual more than60 sec worth of experience was a brand new prolly not broke in against a brand new 6401 that was probably tuned a little better, (cause I didn't do it) so not my fault, just my opinion! So send me that saw for proper evaluation and torture testing protocols to be performed at our state of the art facility, I can't write any more characters! You Win,Damnit

Ohyeah errything is random! I know, this message sponsored by the most random thoughts ever...

 

[p61 western]

Good afternoon fellas.

 

[Czed]

Well I apologize in advance,
But he deserved it! I'm kidding, cause I milled quite a few post mainly Eastern Red Cedar with a 540and a mini mill , building stalls in the middle of nowhere. I've never been impressed much with a three 9zeroS , never saw a ported one though...

He knows
He's a saw guy and didn't want to run his
Pro saws in a mill
I told him before it wouldn't hold up.
Actually you'd be suprised i bumped the timing on a couple of 390s
And did the 046 carb swap
Did just fine with a 20
I'm going to give milling a try with a china 372 on small stuff
See if it holds up as well as they have felling.