not so pros

[huskihl]

Here is a 50mm Mahle. Looks to be OK, no scoring, galling or aluminum transfer. No piston though, but I am thinking that a 266 or 268 should be just fine. I like the Meteor myself.
It's on my tool bag, so I don't forget it.

View attachment 86919

Bringing the hens tooth intake boot and block too?

I'm sooo not worthy

 

[hoskvarna]

Bringing the hens tooth intake boot and block too?

I'm sooo not worthy

The hell your not with what ive seen you doing for others [emoji106]


Sent from Hoskvarna Hills

 

[huskihl]

The hell your not with what ive seen you doing for others [emoji106]


Sent from Hoskvarna Hills

Almost anybody can do what I've done. But almost nobody has a 625/670 intake block lol

I appreciate the kind words just the same though

 

[Time's Standing Stihl]

Night men

Sent from my SM-G900R4 using Tapatalk

 

[p61 western]

Night men

Sent from my SM-G900R4 using Tapatalk

Good night Clint.

 

[Czed]

Goodnight guy's

 

[Stump Shot]

Bringing the hens tooth intake boot and block too?

I'm sooo not worthy

Just what is in the picture

 

[huskihl]

Just what is in the picture

That will definitely do the trick. Thank you sir

 

[Canadian farm boy]

@huskihl @Stump Shot
Looks like I'm putting my spiny thingy back in the 272 jug. I took another .020 off the base and out of the chamber tonight and rechecked the port timing.
I'm currently sitting at 80/122.5/105.
I can live with 80 on the intake. I want the transfers at 121-120 and the exhaust at 102. Guess this is my job for tomorrow evening.

 

[Cigmaker]

Good evening Travis, how are you doing tonight?

Finally made it home! Hot tub is calling my name. Anything exciting going on with you?

 

[huskihl]

@huskihl @Stump Shot
Looks like I'm putting my spiny thingy back in the 272 jug. I took another .020 off the base and out of the chamber tonight and rechecked the port timing.
I'm currently sitting at 80/122.5/105.
I can live with 80 on the intake. I want the transfers at 121-120 and the exhaust at 102. Guess this is my job for tomorrow evening.

The AM jug on mine only had 12° blowdown. I raised The exhaust a few to get 16 or 17°. I never did cut the base or squish yet. Could probably take .050 off and would be a better runner. Its a back-up cylinder now anyway when i put the 670 from Steve on it

 

[p61 western]

Finally made it home! Hot tub is calling my name. Anything exciting going on with you?

Not much real exciting going on lately. I can't wait for the weather to cool off so I can enjoy the hot tub some more.

 

[expert of nothing]

Good evening feller's And G-night feller's Ya'll have a safe day tomorrow. It's been crazy, I'll catch up with you sawhounds tomorrow.

 

[Dub11]

8 on most all my saws 036 I'll switch around depending on what I'm doing but anything ported 70cc and up tun a 8 and if short bars I will put a 9 on

So your the dick that bought all of Daves 9 pin sprockets!

 

[expert of nothing]

Goodnight guy's View attachment 86952

Dave, that looks pretty much illegal lol. But I like it any way.

 

[Cigmaker]

Not much real exciting going on lately. I can't wait for the weather to cool off so I can enjoy the hot tub some more.

Its a life saver for an old cripple like me lol.

 

[dall]

Since the time I took off I have lost respect for a few on this site and it's getting to the point where I don't care if I'm on this site or not
Seems like only a few are allowed to do what they want without being criticized
Not sure exactly how long I'll actually want to be a part of this site

I took up for a friend when he was called stupid and the guy that did it annoys the *f-word out of me and quite a few others
He won't shut up or drop anything and pissed me off last night I'll not be around much longer on this site

 

[dustinwilt68]

Sorry Dall, thanks for having my back.

 

[dall]

Morning Dustin how's you

 

[dustinwilt68]

Still at work, last night for 6 days. Hoping to get the 064 finished and start another