not so pros

[Canadian farm boy]

When are you getting your hammer?

@dall

 

[huskihl]

If Mike is coming to your gtg for sure, then I well definitely send it to you Kevin.

I think it's a safe bet that ol' GTG hoe will be here

 

[dall]

lol im not lol

 

[Czed]

It's a 2149, and I don't know much about them.

If it's 45mm I've got a piston for it
It's either 44 or 45.

 

[Canadian farm boy]

I think it's a safe bet that ol' GTG hoe will be here

I'll be there. Might even show up early

 

[dall]

@dall

View attachment 80349

i prefer my esting 16 ounce slag pick for destruction

 

[huskihl]

I'll be there. Might even show up early

Anytime buddy. Let me know when so I can get some pants on

 

[p61 western]

@dall

View attachment 80349

Lmao good one Mike.

 

[p61 western]

If it's 45mm I've got a piston for it
It's either 44 or 45.View attachment 80350

Good evening Dave, how are you doing? When I get it tore down I will let you know if it needs a piston, and what size it is.

 

[czar800]

Good evening Mike, how are you doing tonight? That saw will find it's way up north lol.

I'm good, dad and I cut some wood after work now I'm tinkering around in the shop. How's things in California this evening?

If you could Post your PayPal info. I'd appreciate it.

 

[beaglebriar]

I'm not sure, I haven't touched it yet. The recoil seems to have issues, but I will check it out before I hit ya up for it.

Pretty sure they're open port. Ditch the cylinder and replace it with a 346. You'll have a good little saw.

 

[p61 western]

I'm good, dad and I cut some wood after work now I'm tinkering around in the shop. How's things in California this evening?

If you could Post your PayPal info. I'd appreciate it.

It's hot out here, but that's nothing new. You don't need to send me any money. I got the saw for free and don't mind shipping it.

 

[p61 western]

Pretty sure they're open port. Ditch the cylinder and replace it with a 346. You'll have a good little saw.

Brian said a 346 top end will go right on it. I will prolly have to get a different carb and boot, but I'm not sure.

 

[czar800]

Might saw a few out on the mill tomorrow.

 

[beaglebriar]

Brian said a 346 top end will go right on it. I will prolly have to get a different carb and boot, but I'm not sure.

They should work. The boot is prone to tearing and you'll have to check for the dreaded plastic intake clamp.

 

[huskihl]

Brian said a 346 top end will go right on it. I will prolly have to get a different carb and boot, but I'm not sure.

Nope. It's all the same. I think a 2149 is a 351 or 353. Mag case semi pro saw with an open port cylinder. Put a 346 jug on it and it'll be a 346. Same carb and intake

 

[p61 western]

Might saw a few out on the mill tomorrow.


View attachment 80353

That's a good load of wood mike, and a cool truck.

 

[p61 western]

Nope. It's all the same. I think a 2149 is a 351 or 353. Mag case semi pro saw with an open port cylinder. Put a 346 jug on it and it'll be a 346. Same carb and intake

Good info, thank you Kevin.

 

[p61 western]

They should work. The boot is prone to tearing and you'll have to check for the dreaded plastic intake clamp.

Is there a metal clamp available DJ?

 

[beaglebriar]

Is there a metal clamp available DJ?

I use a 385/390 clamp on those.