Not so pros 4 new and without politics

[Woodpecker]

Is this the new hammer donkey thread?

 

[John Wargo]

Is this the new hammer donkey thread?

Who started this crap?

 

[cuinrearview]

#tiddysadness
#fuchthisheat

 

[Dustin4185]

Why are there no Stilleto lovers here? Does no one swing a titanium hammer?

I swung a TiBone for years until…….i bought a Martinez M1….then a M4……then the big M79 head….then the 7oz Ti head. Add in a square and pry bar, and I was $500 in on frigging hammers. Then prices went sky high and he sold the company. Does my $250 ($350 now) drive nails any better than an Estwing, NO. Does it let me swing and drive 60d pole barn spikes all day, yep.

 

[redline4]

At least you fuggers don't want to compare torque wrenches.

 

[jacktheripper]

At least you fuggers don't want to compare torque wrenches.

These two are my favorites

 

[redline4]

View attachment 467082
These two are my favorites
View attachment 467083

They are now using torque to yield bolts in the transmissions with ridiculously low torque specs so I was forced to get a digital inch pound with angle capability to match my 1/2" ft lb wrench. I traded in my click type inch pound and 1/2" click wrench on it.

 

[jacktheripper]

They are now using torque to yield bolts in the transmissions with ridiculously low torque specs so I was forced to get a digital inch pound with angle capability to match my 1/2" ft lb wrench. I traded in my click type inch pound and 1/2" click wrench on it.

I got my husky digital one on sale just to see what digital is all about. I’ve use the torque angle function on it quite a bit for heads now. Still hasn’t failed, and cost me $90. It’s got the same computer and buttons on it as my buddy’s snap on.

 

[redline4]

 

[ammoaddict]

Is this the new hammer donkey thread?

I guess I'll have to take some hammer pics now. No framers though. I have my grandpa's old bluegrass, at least 75 years old. I have dad's old bluegrass. I have an estwing and a couple Stanleys.

 

[ammoaddict]

Estwing makes good stuff. Their 26" campers axe is great for making kindling or for putting into the backpack.

View attachment 467077

I just ordered one of these this morning.

 

[Kiwioilboiler]

Morena hammer torkers.

 

[jacktheripper]

Just welded up a torsion axle to this trailer and bedlined the underside. This method works best.

 

[John Wargo]

At least you fuggers don't want to compare torque wrenches.

I'm such a slacker. I don't even own a torque wrench.

 

[ammoaddict]

I'm such a slacker. I don't even own a torque wrench.

I have one at work that came with some machines we installed. I used it during installation but haven't used it since. I've worked on textile equipment for over 40 years, I pretty much know what needs to be tight and what needs to be snug. I have one at home that i use very little. Last time I used it was building an AR. I rarely work on vehicles anymore.

 

[Woodpecker]

View attachment 467086

That bastard swore he’d never tell!

 

[Kiwioilboiler]

No need for fine tightening measurement tools here this morning.

 

[Woodpecker]

No need for fine tightening measurement tools here this morning.
View attachment 467130View attachment 467131View attachment 467132View attachment 467133View attachment 467134

Dats a lotta donkey hammering right there.

 

[John Wargo]

Did someone request meat pics? Tomorrow's lunch just went on the smoker.