Not so pros 4 new and without politics or drama

[nbbt]

Good morning. It was 40f this morningup to 46f and going to 76f.
Went out and looked at the garden box repair and resize from around the Rhubarb patch.

and the stuff in the fenced area looks to be doing OK as well for this early in the year.

The other patch in another area has not sprouted yet, but it doesn't get the heat bump from being next to a building.

 

[Tor R]

We've had another day of splitting, we've finished going through what we had.
Tomorrow I'll line up the pallets, before I change equipment on the tractor.
Next round is to chop a new batch, we'll see if I take the 564 or the newly built 357, both have full wrap which is perfect for what I'm going to put in the ground, rough hilly or mountains at the back.
But now I'm going to have a cup of tea or two.

 

[Sloughfoot]

50s and raining all day. High of 58. Locally known as winterlike conditions.

 

[Kiwioilboiler]

Morena E Hoas.
Daylight stealing and Temps down to around 8c/46f in the morning.
Winter is coming.

 

[Wonkydonkey]

Err…. I'd move Adam

 

[Wonkydonkey]

Morning y’all 8 going 14*C &

 

[Tor R]

Good morning ladies & boys

 

[ray benson]

Good morning. 57°F/ 14°C going up to 66°F/ 19°C.

 

[Tor R]

I've put some diesel in the tractor, a cup of tea, and then I'm going to line up the house firewood for drying.

Got some packages today, tools, and an overhaul kit for the other frontloader cylinder, we see that the seals are rotten due to age, so then everything is ready the day it leaks.

Tool pics:

 

[Stump Shot]

Good morning. already up to 46F

 

[SawAddictedFarmer]

Morning everybody. Just now getting over another cold, I'm ready to be back to normal?

 

[Kiwioilboiler]

I've put some diesel in the tractor, a cup of tea, and then I'm going to line up the house firewood for drying.

Got some packages today, tools, and an overhaul kit for the other frontloader cylinder, we see that the seals are rotten due to age, so then everything is ready the day it leaks.

Tool pics:

View attachment 488444

View attachment 488445

Now I love Wera tools and live in a commie metric zone, but WTH would you deliberately buy a 9mm socket?

 

[redline4]

Now I love Wera tools and live in a commie metric zone, but WTH would you deliberately buy a 9mm socket?

For what it's worth, the hex end on some sway bar end links and tie rod ends are 9mm.

 

[Tor R]

Now I love Wera tools and live in a commie metric zone, but WTH would you deliberately buy a 9mm socket?

It's so rare that I can't remember the last time I used a hex 9 socket, I have but it's been a donkey year since the last time.
In the standard bolt system that we buy from a hardware store, hex 9 doesn't exist, it probably happens mostly on special bolts.
The only reason I bought it was because I had clicked that day that I'm standing there and needing hex 9 while I skipped buying it when I made the system lol