Joe Kidd
I reckon so

Yep. A good truck 'll drop the parts it doesn't need.Part of his transfer case
Yep. A good truck 'll drop the parts it doesn't need.Part of his transfer case
Nun ya bidnesslol you old *f-worder
you watch alot of nuns ?
Air.What was in it
If it was a Chevrolet, I'd say it was one of his door pins.What was in it
Mine are goodIf it was a Chevrolet, I'd say it was one of his door pins.
Don't forget to send us some gooder New Zealand apples here in a couple of months Adam's applezzzMorena you poor frozen baztards.
25/77 during the day this week and we set the AC to 21/70 at night to sleep.
I need a good sleep to stay sharp as I drive around as I'm on the lookout for a stand of galvanized trees to feed my new roofing sawmill business.
Keep sharp ay.
Dachshund dammit.Dashund. Is badger hound.
Years ago on arboristsite member Bob Wright an Echo dealer, said it was his favorite saw.Got some echo Kioritz 60s saws from Foothills Vintage Saws. View attachment 442018View attachment 442019
Bubba done jacked his square body up so high that everyone is pulling up on the doors to get in. I'm waiting for it.....Mine are good
They are different than the 88-99 models
did he say what size truck it will hold or boat it will anchor ?Years ago on arboristsite member Bob Wright an Echo dealer, said it was his favorite saw.
i have a hard enough time getting in mine lolBubba done jacked his square body up so high that everyone is pulling up on the doors to get in. I'm waiting for it.....
I destroyed the tilt mechanism of a mid 80s Suburban steering column by years of grabbing and pulling on the steering wheel to get inBubba done jacked his square body up so high that everyone is pulling up on the doors to get in. I'm waiting for it.....
Just a 4" suspension lift, but he has 37" tires on it.i have a hard enough time getting in mine lol
how much lift did he do
We used a non tilt column from a newer truck in his. It was busted too.I destroyed the tilt mechanism of a mid 80s Suburban steering column by years of grabbing and pulling on the steering wheel to get in
Had to get a salvage yard in Washington somewhere to freight a complete used column up to the bush
Blanking Chevy...
Youd have a hard time getting in a fùcking Prius. Crippled up old bastard…i have a hard enough time getting in mine lol
how much lift did he do
Any lightweight Chevrolet will do W.Virginiadid he say what size truck it will hold or boat it will anchor ?
Looks damn good to me.Evening boys. Proof that I am neither a body man nor a welder! LolView attachment 442043Seam sealer and paint will fix the rest!
Ya, but you sure can swing a rubber mallet DJ. LooksEvening boys. Proof that I am neither a body man nor a welder! LolView attachment 442043Seam sealer and paint will fix the rest!
lol you just needed to take the wheel off and tighten 3 screws lolI destroyed the tilt mechanism of a mid 80s Suburban steering column by years of grabbing and pulling on the steering wheel to get in
Had to get a salvage yard in Washington somewhere to freight a complete used column up to the bush
Blanking Chevy...
yukon has running boardsYoud have a hard time getting in a fùcking Prius. Crippled up old bastard…
That's right, it would be exterior door handles under yours.Mine are good
They are different than the 88-99 models