Not So Pro 3

[redline4]

 

[redline4]

And here's how the cross the exhaust from the front back to the rear..

 

[dall]

40’ deck over. It’s not bad. The sketchy part is the chains sliding on the metal ramps, or if you get a little off center, they can slide you off the side. Go slow and pay attention, and it’s not bad.

dozers are the same way

 

[Mastermind]

i think they finally got mine under control

This is the best thing I've read today.

 

[Mastermind]

And here's how the cross the exhaust from the front back to the rear..View attachment 413826

Looks like they wanted to keep the oil warm.

 

[dall]

Excellent

since started taking new medicine its went down to around 130 /85
ive seen 160/120 and 160/102

 

[redline4]

All apart

 

[3browns]

Morning folks, 30 on the way to 40, foggy, and light, wet snow

Coffee weather

 

[NateSaw]

Good morning fellas. I accidentally closed the bar down last night. But I only bought 1 beer.

What was his name?

 

[NateSaw]

Thanks Randy. I thought I was only supposed to contact you for rental pigs???

 

[sawmikaze]

Can I just buy 15w40 for my pressure washer pump ?

 

[dall]

Thanks Randy. I thought I was only supposed to contact you for rental pigs???

lol just contact us and we will make him do something

Can I just buy 15w40 for my pressure washer pump ?

stop by i have plenty lol

 

[p61 western]

I found the starter

View attachment 413818

Like a Toyota

 

[3browns]

Like a Toyota

I used to curse the GM starters on automatic trannys where you had to fool with the shim tabs to set the tooth engagement

Little did I know

 

[redline4]

Ready to go back together

 

[3browns]

Ready to go back together
View attachment 413847

Was that seriously just about changing the starter?

 

[redline4]

Was that seriously just about changing the starter?

No. Oil leak at the lower crankcase.
Look 7 or so posts above an you'll see where I had the bottom end split.

 

[p61 western]

I used to curse the GM starters on automatic trannys where you had to fool with the shim tabs to set the tooth engagement

Little did I know

lol technology has not made things easy to work on.

 

[3browns]

No. Oil leak at the lower crankcase.
Look 7 or so posts above a you'll see where I had the bottom end split.

I guess I skimmed through too quickly

Thx

 

[timg]

All apart

View attachment 413833View attachment 413834View attachment 413835

Pretty amazing engineering and machining Ed. So do the main caps float in the lower base assembly? I see the hardware goes through the windage tray too. Fuggin amazing.