Not So Pro 3

[redline4]

You forget the 10 series exploding trucks.

Yeah, those were the best with dual tanks because it didn't matter which side you hit them on.

 

[Mastermind]

That flat tabletop torque from 2500 to 4500 should make for a good work truck ay. Would you want to rev it any higher?

I wish they would have started the dyno pull at 1500.

But no....never over 4500.

From off idle to 3500 is where my interest lies.

 

[Stump Shot]

I wish they would have started the dyno pull at 1500.

But no....never over 4500.

From off idle to 3500 is where my interest lies.

When you build for torque. hp will naturally follow...

 

[dall]

Damn slackers

 

[hoskvarna]

Damn slackers

Not today

Sent from Hoskey hilltop

 

[hoskvarna]

Sent from Hoskey hilltop

 

[dall]

Not today

Sent from Hoskey hilltop

me either but i didnt take pictures

 

[hoskvarna]

me either but i didnt take pictures

Pics or it didn’t happen right [emoji2957]
Lol


Sent from Hoskey hilltop

 

[Kiwioilboiler]

Damn slackers

Nope. Realigned bumper, retightened and clocked IC hoses for a bit more clearance, touched up a couple of paint chips and fitted some new weather shields before washing the Toy Truck.

Then wandered over to catch up with this legend. Anyone know why a TS460 might take 20 plus pulls to fire? I haven't been into it yet but it's just a MS460 underneath surely?

 

[Dream]

Evening knuckle humpers.
Went up and saw mom for mothers day.
Dad wanted to bring his small tractor over so he could lay off rows for the garden.
1950 Allis Chalmers C.
Ended up having to file the points and clean the contacts for the rotor in the mag on that one too.
Must've been pretty humid over the winter.
Good thing about those is you can just take the whole mag off with 2 bolts and set it up on the work bench where you can see what youre doing.
Popped right off and ran well once that was done.

 

[Dream]

Nope. Realigned bumper, retightened and clocked IC hoses for a bit more clearance, touched up a couple of paint chips and fitted some new weather shields before washing the Toy Truck.

Then wandered over to catch up with this legend. Anyone know why a TS460 might take 20 plus pulls to fire? I haven't been into it yet but it's just a MS460 underneath surely?
View attachment 336044

I'm guessing the contraption on the front of the trailer is a form of brakes?
Seems similar to what we would call "surge brakes", but looks a bit less compact.

 

[Kiwioilboiler]

I'm guessing the contraption on the front of the trailer is a form of brakes?
Seems similar to what we would call "surge brakes", but looks a bit less compact.

Hydraulic over-ride Brent. Tow vehicle stops, trailer keeps pushing, compresses brake fluid in coupling master cylinder which squeezes calipers. Lloyd's coupling just has a big ass ball shoe handle for some reason.

 

[dall]

Pics or it didn’t happen right [emoji2957]
Lol


Sent from Hoskey hilltop

lol noone would believe me anyways so the hell with it lol

Nope. Realigned bumper, retightened and clocked IC hoses for a bit more clearance, touched up a couple of paint chips and fitted some new weather shields before washing the Toy Truck.

Then wandered over to catch up with this legend. Anyone know why a TS460 might take 20 plus pulls to fire? I haven't been into it yet but it's just a MS460 underneath surely?
View attachment 336044

nope not the same
they are a clamshell motor
bolts go up through for the bottom side and down through for the cylinder
i may still have pictures but they suck to work on to get screws out

 

[dall]

 

[Kiwioilboiler]

View attachment 336046 View attachment 336047

Ta. I'm guessing its tune Dallas. Has a heap of compression.

 

[Dream]

Hydraulic over-ride Brent. Tow vehicle stops, trailer keeps pushing, compresses brake fluid in coupling master cylinder which squeezes calipers. Lloyd's coupling just has a big ass ball shoe handle for some reason.

Yep. Same stuff as here.

 

[dall]

Ta. I'm guessing its tune Dallas. Has a heap of compression.

that one had seals and bearings go bad so check that as well

 

[Kiwioilboiler]

Yep. Same stuff as here.

He's just been over to borrow my big axle stands to change the grease out and replace pads. I blame you for mentioning it.

 

[Wonkydonkey]

Good morning slackers & slappers

just caught up on 4 or 5 pages over coffee

i gotta hit the road and do some small fencing job today, should be easy….. famous last words

 

[Mastermind]

Anyone know why a TS460 might take 20 plus pulls to fire?

Either losing prime because of a hole in the fuel line, or impulse is sketchy. Seals, impulse line, carb issues....

In other words....stuff ain't right.