Not So Pro 3

[Mastermind]

I'd say any rtv sealer does.. when it hardens in the passage of fuel/air flow

lve seen too much squid out that I’ve added in transfer ports

It’s the same old less is more theory till there’s to little to do the job

 

[Wonkydonkey]

But that’s the blue non hardening ? Moto seal is like dirco and rtv sealer ?

or am I wrong ?

 

[redline4]

Does motoseal hinder performance?

Discuss.

View attachment 318127

You can't plug the performance of these ports with anything.

 

[Mastermind]

But that’s the blue non hardening ? Moto seal is like dirco and rtv sealer ?

or am I wrong ?

Correct.

The Hylomar will wash away in the transfers.

 

[Mastermind]

You can't plug the performance of these ports with anything.

View attachment 318129 View attachment 318130

Oh Lawd.

 

[dall]

I'll have you know that RC car still isn't finished....

slacker

 

[Mastermind]

slacker

It's a big club evidently.

 

[Stump Shot]

Correct.

The Hylomar will wash away in the transfers.

What of the surface you are trying to keep sealed up? Will it stay in there good? I never tried it as it bothered me, but maybe I can rethink it too is why I ask. Might be like the clear silicone on the old Macs, that shouldn't have worked either, but it did.

 

[Dub11]

Id kind of like to meet fabz actually, if only to get a better idea of what the hell is wrong with him.

Meth. And maybe some more meth with a touch of fetal alcohol syndrome.

View attachment 317937

Aint you got a flatbed for hauling?

It's a 1989. Drove it quite a bit today. The low compression cylinder might have been a stuck ring. Seems to be coming around. Fun as hell to drive. Going to get me in trouble lol. Pretty cool Bubba got one.

So you're gonna be MustangMike 2.0?

 

[Dub11]

I live in a very small town, the k-6 school has maybe 150 kids. People have to line up now, with a little number in the windshield and they call ur kids number in on the walkie-talkie and then release your kid. Somehow it take a friggin hour to get all the kids out of the school. And then theyve added in early release wednesdays, so that i ha e to stop what im doing to pick up kids at 1:30. Super convenient....not.

I'm lucky and drop off my kids. And we have late start Fridays but only for the k-5.

 

[cus_deluxe]

I use permatex anaerobic gasket maker, pretty sure is loctite 518. A little goes a long way, it washes away inside the saw and cleans up easy on gasket surfaces in my experience.

 

[Mastermind]

What of the surface you are trying to keep sealed up? Will it stay in there good? I never tried it as it bothered me, but maybe I can rethink it too is why I ask. Might be like the clear silicone on the old Macs, that shouldn't have worked either, but it did.

There are only a few saws that I delete the base gasket on. And on those I've worried endlessly about either having a leak, or obstructing the transfers. I tried 518 because it was non hardening. But.....I had at least one saw develop a leak. I used it as a case sealant on a 3750 Poulan....and it failed. So.....I began using Dirko. Never had a failure. But....I was again being really careful with it not to have any squeeze out into the lowers. Then Joe Harkness recommended Hylomar Blue. That stuff is fantastic. I've used one whole tube now.....and had no issues that I know of.

 

[Kiwioilboiler]

You can't plug the performance of these ports with anything.

View attachment 318129 View attachment 318130

That's to heavily promote fuel air atomization...

 

[Mastermind]

I fubared the quotes.

Yes. Yes you did.

And yeah.....I have a flatbed.

 

[dall]

It's a big club evidently.

yes

 

[cus_deluxe]

I'm lucky and drop off my kids. And we have laye start Fridays but only for the k-5.

We used to have late start wednesdays, but they changed to seemingly random early release wednesdays. All the hipster transplants that moved here during covid dont care, there "working from home" so who cares if they have to walk down to the elementary school in their fancy slippers and skinny jeans. Sort of a pain in the ass for a regular person tho.

 

[cus_deluxe]

You can't plug the performance of these ports with anything.

View attachment 318129 View attachment 318130

Mickeymouse intake ftw

 

[cuinrearview]

We used to have late start wednesdays, but they changed to seemingly random early release wednesdays. All the hipster transplants that moved here during covid dont care, there "working from home" so who cares if they have to walk down to the elementary school in their fancy slippers and skinny jeans. Sort of a pain in the ass for a regular person tho.

A few weeks from now, and a couple old normal winters they'll retreat to Chicago or the brave ones Cadillac.

 

[Dub11]

Yes. Yes you did.

And yeah.....I have a flatbed.

I fixed it now dammit. I'm out of practice.

We used to have late start wednesdays, but they changed to seemingly random early release wednesdays. All the hipster transplants that moved here during covid dont care, there "working from home" so who cares if they have to walk down to the elementary school in their fancy slippers and skinny jeans. Sort of a pain in the ass for a regular person tho.

GD hipsters!!!! Well most people here are on welfare or the grandparents have custody of the kids.

 

[cus_deluxe]

I fixed it now dammit. I'm out of practice.



GD hipsters!!!! Well most people here are on welfare or the grandparents have custody of the kids.

Yeah...it could be worse i guess. Just heard today a young guy i sort of knew who was married with kid overdosed and died. If that chit is in frankfort, then its gotta be everywhere. Too damn bad.