Not So Pro 3

[hoskvarna]

Spent 6hrs in the bobcat today cleaning snow again
Could get another 2-4 by Sunday [emoji2959][emoji2959][emoji2959][emoji2959][emoji2959][emoji2959][emoji2959][emoji2959][emoji2959][emoji2959][emoji2959][emoji2959][emoji2959]


Sent from Hoskey hilltop

 

[41FanForLife]

Just got home. Arm is a little tender. And yes the 1a starts second in tonight's feature event.

 

[Lightning Performance]

We are gradually going away from LEDs on the boats after initially thinking they were the ducks nuts. Any sort of failure and you have to replace the whole assembly, rather than just a globe. Actually, not true, i'm using some led bulbs that fit in conventional festoon holders for some of them.

I like the sealed units with a pull out bottom tray and replaceable bulbs.
Jim's have been on the boat trailer for over fifteen years now. They still sell them today, new. I broke mine, once.

 

[Lightning Performance]

alot of hassle getting it licensed
last one i did that was back in 95

Major pia in jersey

 

[Agent Smith]

alot of hassle getting it licensed
last one i did that was back in 95

Here in ohio, you can build a trailer, get a weight slip from the dmv, take the trailer to a truck yard with a scale, they weight it and fill out the slip. Then take the slip to the dmv and you get plates and registration. They don't care about smaller trailers. However im sure there's a cutoff at some point with weight and size but there's guys around here with homemade goosenecks and no problems. I didn't build my tandem trailer but thats how I got plates and registration for it. No inspection or anything

 

[Kiwioilboiler]

View attachment 281293Just got home. Arm is a little tender. And yes the 1a starts second in tonight's feature event.

That's some dedicated fan support right there.

 

[Stump Shot]

Dodge was ahead of there times with the A100
Little Red Wagon



Sent from Hoskey hilltop

Three years after the success of the Ford Econoline

 

[Mastermind]

Shoot.....I'm about ready for bed.

 

[Lightning Performance]

 

[hoskvarna]

Shoot.....I'm about ready for bed.

I is in bed
Gotta work tomorrow [emoji2959]


Sent from Hoskey hilltop

 

[dall]

Here in ohio, you can build a trailer, get a weight slip from the dmv, take the trailer to a truck yard with a scale, they weight it and fill out the slip. Then take the slip to the dmv and you get plates and registration. They don't care about smaller trailers. However im sure there's a cutoff at some point with weight and size but there's guys around here with homemade goosenecks and no problems. I didn't build my tandem trailer but thats how I got plates and registration for it. No inspection or anything

here it doesnt matter how small they want pictures and names of who built it where the metal came from all that *B-S....
anything 3500 pound capacity and up get permanent plates and yearly inspection along with taxed
2000 pound trailers no inspections but have to buy new license for it every year like a car

 

[Agent Smith]

here it doesnt matter how small they want pictures and names of who built it where the metal came from all that *B-S....
anything 3500 pound capacity and up get permanent plates and yearly inspection along with taxed
2000 pound trailers no inspections but have to buy new license for it every year like a car

I hope it never changes here lol

 

[Stump Shot]

c channel is 3/16 so not really heavy and multi pass on thicker stuff
220 volt machine is more dependable for anything over 1/8 than the 120 volt machines ive used

Still, probably thicker than the original truck frame.
See the reinforcement plates to bolster up the frame for the turnover ball?

 

[Stump Shot]

View attachment 281293Just got home. Arm is a little tender. And yes the 1a starts second in tonight's feature event.

I like steak sauce just as much as any feller, but not that much. Lol

 

[cuinrearview]

here it doesnt matter how small they want pictures and names of who built it where the metal came from all that *B-S....
anything 3500 pound capacity and up get permanent plates and yearly inspection along with taxed
2000 pound trailers no inspections but have to buy new license for it every year like a car

Two governors back we had a crazy *b-word that grabbed money left and right. She came up with the permanent trailer plate. $255 bucks good forever. I hated it at the time but loving it now.

 

[41FanForLife]

That's some dedicated fan support right there.

That's small compared to the Jason Johnson tat on my arm. Just a big time fan of the winged sprint cars.

 

[Slumberjack]

every damn one of you are yes lol

lol i have pictures

quit trying to be cool lol

just think if it was in person


why did you do that for
yes were not supposed to take pictures or videos either at work

i can see why


chocolate covered coffee beans are good

just saying
exactly

and down below looks just as gapped right ?

they are


atleast i wont need a mirror now
hes just like you then
just wait until both of you need diaper change at the same time
see who gets top priority lol

I’m not cool I’m a dork. And I didn’t do dat, somebody on youtubes did lol

 

[Slumberjack]

266/272 extra boudin is alive and running but still missing some finishing touches. But I’ll be cutting with it tomorrow

 

[dall]

Still, probably thicker than the original truck frame.
See the reinforcement plates to bolster up the frame for the turnover ball?

but what is the hitch rated for ? rear hitch says 13000 pounds
the plates on the side is for mounting the hitch so it doesnt interfere with the top flange

Two governors back we had a crazy *b-word that grabbed money left and right. She came up with the permanent trailer plate. $255 bucks good forever. I hated it at the time but loving it now.

it costs me about 15 bucks for inspection sticker on vehicles and on trailers plus what the taxes are every year i dont have a break down on that so i cant say exact amount

I’m not cool I’m a dork. And I didn’t do dat, somebody on youtubes did lol

we know

 

[Woodpecker]

exactly hobart is owned by miller

I know guys can fling poo about Lincoln vs miller but they both make good units