Not So Pro 3

[dall]

The last mig machine I owned was a Lincoln SP200 -- but I like the Hobart in the picture. Seen a few of them.
What are the specs on the machine?

hobart 190 from tractor supply
nothing fancy but it works good
i bought it when i got annoyed with my last mig when i was rebuilding a outdoor wood burner

 

[Lightning Performance]

i need to order some lights and figure how i want to cap of the ass of the bed
i bought 3 sheets of the floor plate so ill have enough to do that

LED round lights with the rubber ring are about as simple as you can get or ovals.

 

[dall]

Hurry up slacker.

lol i need to get the skid steer worked on also
truck is just my project i bought to pull tractor
still need to find a trailer sometime

 

[dall]

LED round lights with the rubber ring are about as simple as you can get or ovals.

thats what i was thinking rounds on the side and ovals in the back
not gonna worry about lights on headache rack as it will be a work truck

 

[ucm931]

and down below looks just as gapped right ?

You askin for pitchers?

 

[stihl_head1982]

gonna be about 1200 pounds when done so it will help with traction
i didnt order enough channel to do headache rack and metal shop isnt open on fridays right now so i have to wait until monday

Out of curiosity what are the dimensions on the deck (Length x width)?

 

[dall]

You askin for pitchers?

nope we will take your word on it

Out of curiosity what are the dimensions on the deck (Length x width)?

96 wide and 104 long

 

[stihl_head1982]

nope we will take your word on it

96 wide and 104 long

nice!

 

[Woodpecker]

The last mig machine I owned was a Lincoln SP200 -- but I like the Hobart in the picture. Seen a few of them.
What are the specs on the machine?

Hobarts are mostly millers in different colors.

 

[dall]

Hobarts are mostly millers in different colors.

exactly hobart is owned by miller

 

[stihl_head1982]

exactly hobart is owned by miller

Not a bad thing. Almost bought a Miller 35 years ago.
I believe if you're trusting it for this heavy frame it must not be all that bad.
Am I wrong?

 

[hoskvarna]

This is where the spermz is storedView attachment 281259

Or injected [emoji2957]


Sent from Hoskey hilltop

 

[Kiwioilboiler]

thats what i was thinking rounds on the side and ovals in the back

We are gradually going away from LEDs on the boats after initially thinking they were the ducks nuts. Any sort of failure and you have to replace the whole assembly, rather than just a globe. Actually, not true, i'm using some led bulbs that fit in conventional festoon holders for some of them.

 

[dall]

Not a bad thing. Almost bought a Miller 35 years ago.
I believe if you're trusting it for this heavy frame it must not be all that bad.
Am I wrong?

c channel is 3/16 so not really heavy and multi pass on thicker stuff
220 volt machine is more dependable for anything over 1/8 than the 120 volt machines ive used

 

[dall]

We are gradually going away from LEDs on the boats after initially thinking they were the ducks nuts. Any sort of failure and you have to replace the whole assembly, rather than just a globe. Actually, not true, i'm using some led bulbs that fit in conventional festoon holders for some of them.

the ones on my trailer i have now are original from 2005 some of the markers ive changed but never the brake ones

 

[p61 western]

lol i need to get the skid steer worked on also
truck is just my project i bought to pull tractor
still need to find a trailer sometime

Build your own trailer?

 

[dall]

Build your own trailer?

alot of hassle getting it licensed
last one i did that was back in 95

 

[leadfarmer]

View attachment 281279View attachment 281280View attachment 281281View attachment 281282

Lookin pretty good fur a westvigginy boy.

Evenin tallywackers

 

[dall]

Lookin pretty good fur a westvigginy boy.

Evenin tallywackers

evening gramps hows you

 

[leadfarmer]

evening gramps hows you

Belly full, now TV wif momma