dall
Mastermind Approved!
- Local time
- 5:33 AM
- User ID
- 795
- Joined
- Feb 5, 2016
- Messages
- 48,770
- Reaction score
- 201,574
- Location
- grafton wv

i dont have a boat so i dont need to buy a huskyBlah blah blah. When did you get your first boat anchor?
i dont have a boat so i dont need to buy a huskyBlah blah blah. When did you get your first boat anchor?
lol best thing for those is a big hammer
he pulls it out and swings it all about
lol i forget it doesnt get freezing there where water lines bust lol
B.O.A.T= Break Out Another Thousand.Boats are junk
YupB.O.A.T= Break Out Another Thousand.
Had a Radio Flyer lil red wagon with a pair of 9" Klein's, a pair of vice grips, a bag full of staples and t post clips, and a sledge hammer for T posts. One of us carried the slap sticks for corner/sag posts. Also had a roll of stiff heavy gauge wire for tensioning corners and sag posts. There was also a bucket of tar for wood posts. Heated by a small fire and dipped the butt of the post in. Barbed wire was dragged along on a reel made from a set of old push mower handles with a rod through the middle of the roll of wire. For tensioning, one of us clamped on the vice grips and grabbed a stick. Held the pliers to the stick and pulled while the other drove a staple. Stood in the wagon to start and drive t posts. Didnt even have a post pounder.Ain't nothing better. When pulling wire, I usually have nothing more than a piece of pipe to roll the barb wire out on, with marks on it for the height of the strands, the stretcher stick, a hammer, and a pair of fencing pliers. I've seen guys need a truck load of bullchit to build a damn fence.
thats why i dont have huskiesBoats are junk
Bend your own staples out of wire stock?Ain't nothing better. When pulling wire, I usually have nothing more than a piece of pipe to roll the barb wire out on, with marks on it for the height of the strands, the stretcher stick, a hammer, and a pair of fencing pliers. I've seen guys need a truck load of bullchit to build a damn fence.
between his butt cheeksBend your own staples out of wire stock?![]()
I thought thats how everyone did it.between his butt cheeks
Pics not needed this timebetween his butt cheeks
Apparently, I like to suffer then.thats why i dont have huskies
Bend your own staples out of wire stock?![]()
Nope, but you did mention you took them with you fencing tho...Naw. But...I don't make the barbed wire, or the tee posts either.
Wasn't too clear, I'm looking for Skil and Power Machinery chainsaw ipls and service manuals.Mr Benson, are you looking for a certain brand, or rather a certain size of file?
How many times did you hit your finger and hate the world? Every time I have a hand injury, everything makes it a priority to hit itNaw. But...I don't make the barbed wire, or the tee posts either.
Ok. So here they would tractor ram a round pressure 5inch treated post in with a banger every 12 ft or so. Then 2" battens about every 3 feet to keep the wire spread apart. A tee post is a flash post. Not a strainer, and not a batten.