Not So Pro 3

[redline4]

We were looking around and couldn’t find any

So now the squatches are parachuting in?
Pretty much *f-worded now.

 

[redline4]

Daughter took her oil-burning Equinox in to the dealer. 80k on the clock. They’re doing an oil analysis on it where she brings it in every 1000 miles for them to check consumption. Might have to check it more often as I don’t think she can go 1000 without adding to it. Apparently there’s a 100k transferable warranty on it

Good deal.
Take it in as soon as it gets low. Hopefully they then do what I do, and just fix it vs drag it out longer.

 

[Czed]

Good Evening Todd. Back from passing out food boxes to needy seniors at the church. Last of the days over 20°C for the next 10 days or so.

A guy came in and bought over 5000.00 of canned vegetables for meals for the needy
Last week.
My sister works in a food pantry and said there's never so many requests.
Lot's of people still out of work
The shop with a cop deal works great they had over 50 kids last year if I remember correctly.
I think each kid gets 200.00-250.00 to buy what they want
At a Walmart.
And many of the cops gave them more money than that.

 

[huskihl]

So now the squatches are parachuting in?
Pretty much *frenched now.

Lol. 2” of leaves on the ground. Even da Squatch wouldn’t leave a track

 

[p61 western]

I bet he was 4-450

Can't imagine what he is now.

 

[p61 western]

Good afternoon fellas.

 

[dall]

why is there a manual on the bench ?

 

[dall]

Damn slackers

 

[dall]

Well this is frustrating. The piston and cylinder I have will not work on this saw. The piston hits the cylinder on top of its stroke. Any ideas?

markings on the bottom edge of cylinder? Possibly you have a 024 or 024 super

 

[dall]

Well this is frustrating. The piston and cylinder I have will not work on this saw. The piston hits the cylinder on top of its stroke. Any ideas?

the 024 super I had had flat fins like what is on the left
Also a S on the top

 

[huskihl]

Well this is frustrating. The piston and cylinder I have will not work on this saw. The piston hits the cylinder on top of its stroke. Any ideas?

Guessing the p/c are for an 024? Maybe

 

[huskihl]

the 024 super I had had flat fins like what is on the left
Also a S on the top

S for Slacker

 

[dall]

Slacker

possibly the rest of the day
Done with the overhead welding for now

 

[dall]

S for Slacker

the 024 super is the one I sent to Tom for his son

 

[huskihl]

possibly the rest of the day
Done with the overhead welding for now

Woots

 

[huskihl]

the 024 super is the one I sent to Tom for his son

Did it burn in the fire?

 

[Boomhower]

Yall is both right its an 024 just PMed seller im sure he will take care of it.


Sent from my iPhone using Tapatalk

 

[Lightning Performance]

Don't think I've used a book to to work on a small engine. Needed one several times. Books were expensive in the seventies and eighties. We're lucky to have a sheet with timing marks for engines or the correct shop manual like Chilton

 

[Lightning Performance]

Another load today

Sent from Hoskey hilltop

Your the new firewood barron

 

[Boomhower]

why is there a manual on the bench ?

Same reason Mr Ray could have a full time job sending them to people.