Not So Pro 3

[Czed]

Mornin'
Got this for 20.00 used once then set 5 year's carb was spotless but the fuel turned to gel in the fuel line never saw that before.
Pingel won't sell a rebuild kit for these 500.00+ remote starters
Trying to figure out which motor they used it *s-word itself
This bastard is finished it cannot be kick started it sheared two off so far
They got it push started the pusher fell on his face and skinned his forehead
I'd burn this damn thing.
Dorito is over 22 years old my neighbor said
These suck Penrose is the good one's

 

[p61 western]

Good morning fellas

 

[3browns]

Morning men, 46 and sunny today

 

[Czed]

Oil thread
In 3+ year's this makes over 35 gallons I've mixed with Castrol GO 40/1

Still no complaints burns clean still under 8.00 a quart
Somebody quoted a friend of mine 1500.00 for a 30 minute or less maple tree job
I loaded up my Buick lucerne work truck
My quote was he helps me install my new metal roof.

 

[AlfA01]

Howdy folks! A little r&r by the seaside with the Mrs. today.

 

[jacob j.]

Howdy folks! A little r&r by the seaside with the Mrs. today.
View attachment 429778
View attachment 429779
View attachment 429780
View attachment 429781
View attachment 429782

Wow Dan - You have a beautiful coastline there...

 

[stihl livin]

Afternoon slackers of ope. Therapy went well again this morning. Very little discomfort and no actual pain. Fingers crossed for a clean mri.

 

[Kiwioilboiler]

Morena E Hoas.

 

[3browns]

Oil thread
In 3+ year's this makes over 35 gallons I've mixed with Castrol GO 40/1
View attachment 429772
Still no complaints burns clean still under 8.00 a quart
Somebody quoted a friend of mine 1500.00 for a 30 minute or less maple tree job
I loaded up my Buick lucerne work truck
My quote was he helps me install my new metal roof.

I have nowhere near the amount you have run under my belt but I was running that same oil the last year or two in Hawaii after YamaLube was renamed YamaScuff

I bought it because it was about the easiest to get but it ran great in saw and trimmer and tuned easily in both

I certainly wouldn't hesitate to use it again

 

[nbbt]

Good afternoon folks.
It's got a bit to humid and not very pleasant to be doing outsides stuffs in the sun.
I forgot to bring out the big fan to keep a little comfortable.
I've got to take a break in an AC'ed area before it totally wipes me out.
Latr' jackals.

 

[farminkarman]

A guy tried to leave some saws at my shop Stihl 291,271 and a 171 and a stihl trimmer
I don't have time for that *s-word
He'd mixed 4 gallons efree with xp mix up last spring for them but his son stole the mixed gas for his ATV
he replaced it with straight gas
He said he was getting a dna test done to see if he actually belongs to him.

At what point do you stop picking up another saw because the last one died? A month or so ago when I dropped my dealer's 3120xp back off at his shop, there was a ms194t, ms250, ms261, and an ms400 all on the counter. The old man straight gassed all of them. According to my dealer, he had just sold him the 400 like a month before. I think it would have been cheaper for him to put oil in all his gas cans.

 

[redline4]

Can anyone tell me why the glow plug control module is setting DTC P163C glow plug control module primary circuit from this picture?


First one gets a free GFY.

 

[farminkarman]

Can anyone tell me why the glow plug control module is setting DTC P163C glow plug control module primary circuit from this picture?
View attachment 429806

First one gets a free GFY.

Is it because it was low on blinker fluid?

 

[redline4]

Is it because it was low on blinker fluid?

Close

 

[Lnk]

Can anyone tell me why the glow plug control module is setting DTC P163C glow plug control module primary circuit from this picture?
View attachment 429806Should be plugged all the way in methinks.

First one gets a free GFY.

 

[redline4]

That's the egr bypass temp sensor connector.

But, your real close to part of the issue with your circle.

It is fully connected.

 

[Mastermind]

Can anyone tell me why the glow plug control module is setting DTC P163C glow plug control module primary circuit from this picture?
View attachment 429806

First one gets a free GFY.

Negative ghost rider.

 

[Lnk]

That's the egr bypass temp sensor connector.

But, your real close to part of the issue with your circle.

It is fully connected.

Broken wire lower left corner of this connection?

 

[redline4]

Negative ghost rider.

Negative....
Your correct even if your saying you don't know the answer..

 

[redline4]

Broken wire lower left corner of this connection?
View attachment 429809

That's a plug used to keep moisture out of unused connector cavities.
Good eye though