Not So Pro 3

[redline4]

They look the same but they’re most definitely not.

You could try better wheels?? Not sure what you have now but the cheap wheels suck balls.

The cheap ball sucking ones.

what do you have now

pictures dammit

It's a piece of shìt one. You'll just have to wait until morning for pictures

If it’s just spitting powder while cutting after a fresh sharpening, chances are your depth gauges, or rakers as they are also known, are too tall, and the cutting teeth aren’t actually engaging the wood. Take 2-3 strokes off each raker with a flat file/mill bastard and test.

They are already well under my .025 guage.
I'd venture they are probably. 035

My biggest complaint I guess is the head has a bit of slop and the backstop for the cutter is the flimsiest fuggin thing I've ever seen. I swear a damn ant could bent the sumbitch in half with minimal effort.

 

[redline4]

what do you have now

pictures dammit

Imagine this, bolted to the side of my workbench, and dirty.

 

[maulhead]

what do you have now

pictures dammit

He was asking about a chain grinder.

Not about you & Jason's Grindr collaboration reunion tour....

 

[beaglebriar]

The cheap ball sucking ones.

It's a piece of shìt one. You'll just have to wait until morning for pictures

They are already well under my .025 guage.
I'd venture they are probably. 035

My biggest complaint I guess is the head has a bit of slop and the backstop for the cutter is the flimsiest fuggin thing I've ever seen. I swear a damn ant could bent the sumbitch in half with minimal effort.

Do you know what angles you are using Ed? I use 30 degree top plate and 50 degree side plate. Gives a decent hook but still holds up in hardwood.

 

[3browns]

He was asking about a chain grinder.

Not about you & Jason's Grindr collaboration reunion tour....

See, that’s the thing

On this particular thread you read the word “chain” and my mind instantly goes to ball gags and whips

What…

 

[maulhead]

See, that’s the thing

On this particular thread you read the word “chain” and my mind instantly goes to ball gags and whips

What…

What about chips?

Does your mind instantly think of, anal leakage?

 

[redline4]

Do you know what angles you are using Ed? I use 30 degree top plate and 50 degree side plate. Gives a decent hook but still holds up in hardwood.

I was using 55/25. I got those from a post on here, don't recall who anymore though.
It can tilt 10 but I don't.

I can hit it one with a 50/30 and see if I can make it cut tomorrow.

 

[beaglebriar]

See, that’s the thing

On this particular thread you read the word “chain” and my mind instantly goes to ball gags and whips

What…

I’m just gonna leave this here….

 

[redline4]

What about chips?

Does your mind instantly think of, anal leakage?

What was that additive? Olestra or something like that.

 

[beaglebriar]

I was using 55/25. I got those from a post on here, don't recall who anymore though.
It can tilt 10 but I don't.

I can hit it one with a 50/30 and see if I can make it cut tomorrow.

10-4…not to beat a dead horse but try dressing your wheel as well it makes a difference.

 

[dall]

Imagine this, bolted to the side of my workbench, and dirty.
View attachment 406464

i wanted to see your cutters too
i have one of the cheap ones like you showed but i dont use it for cutters
i know you can move the movable part quite a bit

He was asking about a chain grinder.

Not about you & Jason's Grindr collaboration reunion tour....

im beginning to think you lured jason to your house by beef and chicken pictures lol

See, that’s the thing

On this particular thread you read the word “chain” and my mind instantly goes to ball gags and whips

What…

so now you admit what you did to your wife ?

or she would beat you if she saw what you type lol

 

[maulhead]

What was that additive? Olestra or something like that.

Yeah I think so. I'd never heard of it until he brought it up last night.

I've never been much of potato chip eating Mf'er.

 

[3browns]

What about chips?

Does your mind instantly think of, anal leakage?

Well, yeah…

Duh

 

[redline4]

10-4…not to beat a dead horse but try dressing your wheel as well it makes a difference.

I actually did that. Even surprised myself I took the time to do it!

i wanted to see your cutters too
i have one of the cheap ones like you showed but i dont use it for cutters
i know you can move the movable part quite a bit

im beginning to think you lured jason to your house by beef and chicken pictures lol

so now you admit what you did to your wife ?

or she would beat you if she saw what you type lol

I'll get you some pics in the morning.


Owner of the dealership just called me.
My service manager passed away. Cancer.
It's a mixed thing..worked with him for almost 30 years. He also really wasn't a very good person, he generally didn't treat others well.
Still, it does suck.

 

[maulhead]

im beginning to think you lured jason to your house by beef and chicken pictures lol

Dodge pics was all it took, to get him here.

 

[3browns]

View attachment 406473
I’m just gonna leave this here….

What an honor

 

[beaglebriar]

What an honor

Convagilations

 

[Mastermind]

Morning fellas

14 below and breezy

The boss is getting better each day

The drain has almost cleared up

They did a swallowing study and her epiglottis is not closing properly so she is still choking easily but they are letting her have soft foods

It's possible she might come home today

The surgeon saw her yesterday and was very pleased with the results

She’s not getting much sleep but that’s typical for a hospital

Carry on

Good to hear that Michael. Gonna keep up the prayers though.

Imagine this, bolted to the side of my workbench, and dirty.
View attachment 406464

I have what looks like the same thing in red. It works ok though.

 

[dall]

Dodge pics was all it took, to get him here.

lol figures

next one will be loony

 

[maulhead]

lol figures

next one will be loony

Did I ever tell you, one of my sisters has her own megacab?