Not So Pro 3

[JugHead27]

More than one way to get home from here slacker

If you hit Georgia be sure to stop in to a bojangles

 

[Lnk]

If I ran the whole world, electricity would have been banned in the 1800s.

Why didn't you run for President at that time? We know you were around.

 

[dall]

More than one way to get home from here slacker

lol your wife would question the detour

If you hit Georgia be sure to stop in to a bojangles

lol hes not riding the pedal bike this time

 

[JugHead27]

lol your wife would question the detour

lol hes not riding the pedal bike this time

Must be nice to be back at work barking at people

 

[USMC615]

Apparently a lot more than the office dwelling clown in Georgia

Lol a lot of walking getting stuff set up

What day are you going home?
I’ll make sure I spread some roofing nails lol

Sooooooooo...ewe shine up for work this week, immediately pull yer shirt up, show the HMFIC yer lil' booboo and all yer light duty and vaginal paperwork...and now yer the official union coffee pot and donut *b-wordh. Got it!

Speakin' of...I'll take a cup of java and a few donuts at 0500 tomorrow mornin'. And don't be late.

 

[USMC615]

Must be nice to be back at work underneath union desks.

Fixted for ya...

 

[dall]

Must be nice to be back at work barking at people

im not a foreman this job

Sooooooooo...ewe shine up for work this week, immediately pull yer shirt up, show the HMFIC yer lil' booboo and all yer light duty and vaginal paperwork...and now yer the official union coffee pot and donut *b-wordh. Got it!

Speakin' of...I'll take a cup of java and a few donuts at 0500 tomorrow mornin'. And don't be late.

if you think that your made up story is so true
then why have i walked 7.5 miles the last 2 nights and most of that pushing a cart getting stuff set up
and you can suck it if you think im gonna be a office dwellers *b-word and bring coffee and donuts

 

[Kiwioilboiler]

Morena E Hoas.

 

[Loony661]

 

[JugHead27]

im not a foreman this job

if you think that your made up story is so true
then why have i walked 7.5 miles the last 2 nights and most of that pushing a cart getting stuff set up
and you can suck it if you think im gonna be a office dwellers *b-word and bring coffee and donuts

Setting the crews up with water bottles are ya water boy

 

[dall]

View attachment 389663

best thing to happen to jasons jeep

Setting the crews up with water bottles are ya water boy

even if i explained how things worked you would be like your dad and not comprehend

are you a office dweller like your daddy jason ?

 

[Mastermind]

Why didn't you run for President at that time? We know you were around.

How do you know I didn't?

View attachment 389663

Best thing that could happen to a Heap.

 

[JugHead27]

best thing to happen to jasons jeep

even if i explained how things worked you would be like your dad and not comprehend

are you a office dweller like your daddy jason ?

I know how it works, you’re a *b-word that’s how it works lol

 

[dall]

I know how it works, you’re a *b-word that’s how it works lol

is that what your daddy jason told you ?
but im still guessing you are a office dweller

 

[USMC615]

I know how it works, you’re a *b-word that’s how it works lol

...and a water and coffee *b-wordh at that. That 7-Eleven Slurpee thing will need new knee pads by this time next week as well.

 

[dall]

...and a water and coffee *b-wordh at that. That 7-Eleven Slurpee thing will need new knee pads by this time next week as well.

we know your knees have thick calouses and you carry a card swipe machine with you while you wear a shirt that says 20 bucks is 20 bucks

 

[JugHead27]

we know your knees have thick calouses and you carry a card swipe machine with you while you wear a shirt that says 20 bucks is 20 bucks

That ole marine could mop the floor with u

 

[JoeDirt]

So I guess you guys in the great white north are just *f-worded next year on WD40 and brakleen?

 

[maulhead]

Grind down the flowered edges of the pin on both sides as they look a little deformed. Then alternately heat both ends of pin only not the bosses until the pin is red. Walk away for an hour or two. You may have to lance out the pin center if it don't free up. It looks as if the barrel is in a weldment surround on that forklift. Is dis-assembly on machine a possibility?

They were flowered before I starting beating on them, not sure if previous owner had them out in the past (before I bought it) or if he tried to remove them and gave up? I've owned this forklift for 18 or 19 years, the last few years the seals have been seeping, they finally blew last week. The two local hydro shops prefer to have them on the bench, one said I would not like the bill if he came out and fixed them on site. I'm going to try my best to get the pins out. The front pins came out so easy I had hopes the back ones would also, no such luck.

Local welder / fab / repair guy I'm friends with may have to come here, if I can't get them out myself. I helped him take apart a earth mover belly scraper a few years back, I remember one pin fought us for days. But it finally came out. Lots of heat, lots of cussing, he finally cut the center out of the pin heated it red, and we took turns swinging a big sledge it moved a fraction of Dall hair at a time. It was a PITA.

Thanks for the ideas.

Maybe a dumb question, but do you have the mast cribbed at the bottom and braced off at the top to take the load off the pins?
If not, then thats why they wont come out.

I did that before I removed the front pins, now there's no load on the back pins from the mast.

We have a porta power with a hollow center. I have welded 1" all thread to pins and pulled them out. Can you get a porta power behind it to push it out?

I don't have porta power, but I'm going to try improvising one, with a bottle jack and pipe between the two pins see if I can get them to start moving outwards.

 

[maulhead]

They were flowered before I starting beating on them, not sure if previous owner had them out in the past (before I bought it) or if he tried to remove them and gave up? I've owned this forklift for 18 or 19 years, the last few years the seals have been seeping, they finally blew last week. The two local hydro shops prefer to have them on the bench, one said I would not like the bill if he came out and fixed them on site. I'm going to try my best to get the pins out. The front pins came out so easy I had hopes the back ones would also, no such luck.

Local welder / fab / repair guy I'm friends with may have to come here, if I can't get them out myself. I helped him take apart a earth mover belly scraper a few years back, I remember one pin fought us for days. But it finally came out. Lots of heat, lots of cussing, he finally cut the center out of the pin heated it red, and we took turns swinging a big sledge it moved a fraction of Dall hair at a time. It was a PITA.

Thanks for the ideas.




I did that before I removed the front pins, now there's no load on the back pins from the mast.



I don't have porta power, but I'm going to try improvising one, with a bottle jack and pipe between the two pins see if I can get them to start moving outwards.

C-hair got auto filtered/corrected to Dall hair.

Funny chit there.