SOLD NOS ELIMINATOR KIT

[JohnnyBlade]

Like title states. This is a Performance Connections NOS kit. It fits the 61, 266/266se chassis. Does not fit properly on the 272xp. It sits too far back on case and will contact the OP presence lever.
Comes with the cover, K+N filter and clamp, and the adapter plate.
$300 plus shipping, FnF or I'll add the 3%.

 

[JohnnyBlade]

 

[Johnmn]

Should work on a 2 piece coil 625 - 670 Jonsered then as well correct? Just in case someone wants to customize their J-red

 

[JohnnyBlade]

Should work on a 2 piece coil 625 - 670 Jonsered then as well correct? Just in case someone wants to customize their J-red

That's why u r the "John"sered master! U r correct!
If it's a two piece coil and the top cover bolt sits in front of the recoil bolt this cover will fit a Jonsered. Pictured below.

If is a 1 piece coil and the top cover bolt sits behind the recoil bolt it will not fit a Jonsered. Pictured below.

 

[JohnnyBlade]

Some more clarification is needed and brought to my attention from a interested member. The head design and plug angle plays a role in the fitment as well. The 61/266 has a more slanted back plug angle than say a 268/272. Or a 630/670. So even though it may fit the case it has to be a 61/266 head on the saw. Hope this helps. Much Thanks to
@ballisticdoughnut