BonScott46
Pinnacle OPE Member
- Local time
- 4:55 AM
- User ID
- 1571
- Joined
- Jul 20, 2016
- Messages
- 1,059
- Reaction score
- 3,588
- Location
- Sweden

Looking to trade my 064 that I have had for several years. Saw came to me as a very low hour unit and I have put 20-25 hours on it since. No cracks, breaks or stripped screws. I have upgraded the following parts:
Clutch drum kit (came with a spur drum)
Unlimited flywheel
Unlimited coil (used)
HD air filter kit
Elastostart
This saw has the early KS cylinder and owns a 28 in hardwood. I have had a 36 on it bar deep in beech and still been able to lean on it. I have removed the baffle and maxed out the stock outlet. All parts are OEM except for the dawgs.
I am looking for a very low hour ms361 ported (preferably) or stock. Shipping would be to 93004 while I would be shipping from Sweden.
EDIT: Just to clarify, in my mind a ported unit would be a more or less straight up trade where as a stock unit would require money on top.

Clutch drum kit (came with a spur drum)
Unlimited flywheel
Unlimited coil (used)
HD air filter kit
Elastostart
This saw has the early KS cylinder and owns a 28 in hardwood. I have had a 36 on it bar deep in beech and still been able to lean on it. I have removed the baffle and maxed out the stock outlet. All parts are OEM except for the dawgs.
I am looking for a very low hour ms361 ported (preferably) or stock. Shipping would be to 93004 while I would be shipping from Sweden.
EDIT: Just to clarify, in my mind a ported unit would be a more or less straight up trade where as a stock unit would require money on top.




Last edited: