SOLD Nice Stihl 064

[BonScott46]

Looking to trade my 064 that I have had for several years. Saw came to me as a very low hour unit and I have put 20-25 hours on it since. No cracks, breaks or stripped screws. I have upgraded the following parts:

Clutch drum kit (came with a spur drum)
Unlimited flywheel
Unlimited coil (used)
HD air filter kit
Elastostart

This saw has the early KS cylinder and owns a 28 in hardwood. I have had a 36 on it bar deep in beech and still been able to lean on it. I have removed the baffle and maxed out the stock outlet. All parts are OEM except for the dawgs.

I am looking for a very low hour ms361 ported (preferably) or stock. Shipping would be to 93004 while I would be shipping from Sweden.

EDIT: Just to clarify, in my mind a ported unit would be a more or less straight up trade where as a stock unit would require money on top.

 

[BonScott46]

More pics, pretty sure i didn’t even clean the outside of the cylinder when i originally went through the saw.

 

[BonScott46]

Changed the oil line shortly after getting the saw and the impulse, fuel delivery lines, elbow and fuel filter in the last 6 months cuz I like to throw money at saws...

 

[BlackGreyhound]

Nice saw. Hope you find a good 361. FWIW, I LOVE my @TreeMonkey ported 361.

 

[jacob j.]

Very nice Mr. K - You guys can buy/trade with Kyle with confidence.

 

[Normzilla]

Looking to trade my 064 that I have had for several years. Saw came to me as a very low hour unit and I have put 20-25 hours on it since. No cracks, breaks or stripped screws. I have upgraded the following parts:

Clutch drum kit (came with a spur drum)
Unlimited flywheel
Unlimited coil (used)
HD air filter kit
Elastostart

This saw has the early KS cylinder and owns a 28 in hardwood. I have had a 36 on it bar deep in beech and still been able to lean on it. I have removed the baffle and maxed out the stock outlet. All parts are OEM except for the dawgs.

I am looking for a very low hour ms361 ported (preferably) or stock. Shipping would be to 93004 while I would be shipping from Sweden.

EDIT: Just to clarify, in my mind a ported unit would be a more or less straight up trade where as a stock unit would require money on top.
View attachment 340880 View attachment 340881 View attachment 340882 View attachment 340883

Very nice clean saw

 

[BonScott46]

Very nice Mr. K - You guys can buy/trade with Kyle with confidence.

Thank you JJ.

 

[Edwad]

Ha be a ported 361 we can trade.

 

[whitesnake]

Sweet saw. Looks like a good one. Ported 361’s are fun! One saw that can do most cutting a man needs to do.

 

[RockiesRider]

I have a ported 036tgat runs pretty damn good, along with a spare ported cylinder and NIB meteor piston and caber rings. It's not a 361 but its a badass saw.
If you were interested.

 

[bulletpruf]

Sweet saw. I have an unported and minty 036 Pro if you're interested. I can throw in some cash on top.

 

[kanscruzer]

I have a very low hour 361 I would trade . Pictures to follow.

 

[RockiesRider]

Do you have a cash price in mind?