need some help finding rings.

[jake wells]

i have the ring specs here
THICKNESS TOP--- .0615-.0625
THICKNESS BOTTOM--- .0615-.0625
END GAP ( IN CYLINDER ) TOP---.015.025
END GAP ( IN CYLINDER ) BOTTOM--- .015.025
2.3750 BORE

 

[Gentleman]

It converts to around 60x1.5mm size ring. What is it going in?

 

[jake wells]

1974 lawnboy D600 engine it uses two rings.
the parts are no longer available from the manufacturer.

 

[P.M.P.]

These guys custom make them
thttp://www.adpistonring.com/index.html

 

[P.M.P.]

http://www.adpistonring.com/custom-piston-rings.html

 

[Gentleman]

You gave the bore size but what about piston size? 60mm would be around 2.3622 inch
These should work: http://www.hlsproparts.com/Caber-piston-rings-set-60mm-x-1-5mm-p/cr6015.htm

 

[jake wells]

Pistons are NLA and my piston is broken in half when the engine tried to swallow a bearing.

 

[jacob j.]

Follow Bruce's link or take a look at Dandrikop's custom sizes on ebay.

 

[jake wells]

guy i apprietate the help i found a set of rings available through caber now i can get my stalled project finished.