MMWS Dolmar 6100 @7,600ft elev

[davidwyby]

Finally tried out the saw I won last year

I’ll do a follow up here below sea level

I’m rusty tuning and didn’t have a tach. Probably a little rich.

 

[davidwyby]

It has grunt. Have to give it pretty heavy feed in smaller stuff to keep it from 4stroking

 

[Deets066]

I’ll do a follow up here below sea level

Under water? Lol

 

[davidwyby]

Air water

 

[deye223]

It is a little fat but better that than the other way ......

 

[old_sir_henry]

View attachment 181548 Air water

Holly Sugar Corp. ?

 

[jacob j.]

My Mooberized 385 did excellent at 7-8,000' elevation when I was cutting in the Cascades.

 

[Hinerman]

My Mooberized 385 did excellent at 7-8,000' elevation when I was cutting in the Cascades.

I bet Moob’s saws would cut in outer space if given the chance. Although, I don’t know what you would cut.

 

[davidwyby]

Holly Sugar Corp. ?

Yes, now Spreckels sugar

 

[BK13]

I think I drove by that place when I was working in SoCal, driving into Hell Centro to get groceries when I
was staying in Borrego Springs.

 

[davidwyby]

I think I drove by that place when I was working in SoCal, driving into Hell Centro to get groceries when I
was staying in Borrego Springs.

Yeah, I live here in hell

 

[BK13]

Yeah, I live here in hell

I must be a glutton for punishment, I kinda miss the days of working down there. Though about three or four days down there would be enough to take care of those thoughts. I don’t really have any real desire to work in 120+ degree days any more.

 

[davidwyby]

I think I'm getting it... @Mastermind

 

[Mastermind]

I think I'm getting it... @Mastermind

Is that sandstone ???????

 

[whitesnake]

Is that a chunk of concrete made to look like wood? Chain on backwards? lol

 

[davidwyby]

Chain was not tip top.

Old dry hard desert pine. They get sick or bugs and send up lots of sap fight it, then die with it in the wood and when it dries it’s hard and sticky as heck. I was noodling with the 30” 395 same day. Some it would melt through and some felt like I had just rocked the chain.

Also tried the speedcut on the 2050 that day and dang it cuts.

But what do you think about the tune?

 

[Mastermind]

Chain was not tip top.

Old dry hard desert pine. They get sick or bugs and send up lots of sap fight it, then die with it in the wood and when it dries it’s hard and sticky as heck. I was noodling with the 30” 395 same day. Some it would melt through and some felt like I had just rocked the chain.

Also tried the speedcut on the 2050 that day and dang it cuts.

But what do you think about the tune?

Tune sounds spot on.

 

[davidwyby]

Tach was giving me fits so I went off @blsnelling and @Benwa 's videos. Thanks guys.

 

[whitesnake]

Chain was not tip top.

Old dry hard desert pine. They get sick or bugs and send up lots of sap fight it, then die with it in the wood and when it dries it’s hard and sticky as heck. I was noodling with the 30” 395 same day. Some it would melt through and some felt like I had just rocked the chain.

Also tried the speedcut on the 2050 that day and dang it cuts.

But what do you think about the tune?

Yeah I hear ya. Looks like some tough stuff. Saw sounds good though. I don't get into too much wood that really fights me. I cut up a bunch of black locust that was down for a year or two once. Wasn't sure whether to use my demo saw or chainsaw. Got thru it all fine just seemed to be touching up the chain quite often lol. Enjoy the 6100! Nice saws!

 

[davidwyby]

Hopefully this weekend I’ll put a good chain on and make a video to do the saw justice