Manual saw

[davidwyby]

@stikine how do I sharpen this?

 

[Stevetheboatguy]

@stikine how do I sharpen this?

View attachment 369624

You start by sending me the 8 lug wheels........


Steven

 

[Lnk]

@stikine how do I sharpen this?

View attachment 369624

7771-2508-MTDC: Crosscut Saw Manual

 

[Lnk]

@stikine how do I sharpen this?

View attachment 369624

0223-2324P-MTDC; Crosscut Saw Tooth-Setting Tool index

 

[Lnk]

@stikine how do I sharpen this?

View attachment 369624

Saws - Sharpening and Refurbishment - Paul Sellers' Blog

paulsellers.com

Hope these links help.

 

[Ketchup]

That one may be a lost cause. It may be too brittle to set the teeth. Sharpen a few teeth and then try setting them. They may just snap.

 

[Lnk]

That one may be a lost cause. It may be too brittle to set the teeth. Sharpen a few teeth and then try setting them. They may just snap.

Annealing and retempering is a whole nother thing. Might be a lost art at this point. On old saw I mean. Good luck.

 

[blades]

thats a strange one in that the tooth pitch changes from front to back. Never seen that before. around my parts we call those misery whips.

 

[Ketchup]

thats a strange one in that the tooth pitch changes from front to back. Never seen that before. around my parts we call those misery whips.

Tuttle tooth with a starter section of plain tooth. Pretty common for firewood saws. The plain teeth are a lot easier to sharpen but don’t clear chips as well.