FOUND IT Mac 10-10S or Pro Mac 55

[motoOzarks]

or similar PM700
upper 50-60 cc
their may be other model numbers I haven't got a grasp on yet.

Not wanting a total project
Doesn't have to be pretty

just a good saw would be great

what ya got?

thanks

 

[Johnmn]

I believe I have a 10-10 with spare parts too. Not a runner but it's complete with compression. I'll double check after work.

 

[Steve]

I've got some things at home you may be interested in.

 

[Junkyard]

I’ve got several 10-10, some are parts and one was a runner. Also have a 7-10 that’s pretty nice.

 

[motoOzarks]

Ya'll post or send a pic and price so I can drool and decide

 

[Johnmn]

I just got home I'll check it out tomorrow morning

 

[Steve]

Super 6-10 Auto

I rebuilt this completely about 8 years ago. Used maybe 10 tanks?

Piston, rings, all bearings, all seals and gaskets, points, condenser and so on. Cannot get a compression reading because I am afraid I will break the starter if you don't use the DSP valve! Has one of Mark's steel full wrap bars. Will include the original handle bar too.

Never tried selling it because I would like to get around $400 for it.

 

[Steve]

Rhs 10-10a. Everything works just fine. It's a little tired, around 130 compression. I have a brand new piston and cylinder I built for another project I was going to swap in to it.

$125 like you see. Add $100 if you want the new engine too.

 

[Steve]

Mac 250.

Completely rebuilt with new bearings, seals, gaskets, and piston rings. Sports the tillotson hl63 carb. This saw runs very well for a 250. Mark ran this saw at the wky gtg in 2014 and agreed it ran extremely well.

Would like $250 for it. (no pun intended!)

 

[jacob j.]

Super 6-10 Auto

I rebuilt this completely about 8 years ago. Used maybe 10 tanks?

Piston, rings, all bearings, all seals and gaskets, points, condenser and so on. Cannot get a compression reading because I am afraid I will break the starter if you don't use the DSP valve! Has one of Mark's steel full wrap bars. Will include the original handle bar too.

Never tried selling it because I would like to get around $400 for it.

View attachment 295640 View attachment 295641

The 6-10/7-10 Automatics are pretty much factory hotrods.

 

[Steve]

The 6-10/7-10 Automatics are pretty much factory hotrods.

I'd agree. Yes, was a little lean to get it there.

 

[Steve]

I just got home I'll check it out tomorrow morning

You work too hard John! Got anymore blue saws?

 

[motoOzarks]

I've got some things at home you may be interested in.

View attachment 295586

I've decided on one of your saws