Looking for Tillotson Fuel Line Elbow

[LS50713]

I am in search of a couple of these elbows to replace ones that are cracked and suck air
I am not opposed to trying to rplace them with brass elbows if that is an option. Poor design is an understatement.

 

[EFSM]

I am in search of a couple of these elbows to replace ones that are cracked and suck air
I am not opposed to trying to rplace them with brass elbows if that is an option. Poor design is an understatement.

AFAIK all those little plastic fittings are the same, both Walbro and Tillotson. We actually stock them under a Tecumseh number (Tecumseh used Tillotson carbs on their little 2-stroke cultivator engines). The Tecumseh number is 640363, not sure about the Tillotson number. https://www.ebay.com/itm/232983935613

 

[Squareground3691]

Pardon Our Interruption...

 

[LS50713]

Pardon Our Interruption...

Yep after diligent searching and cross referencing this is the route I am gonna go. Thanks for the info....
Plastic is not an option anymore, I hate leaks.

 

[av8or3]

lol,they should have known they would never last when they were made. (50 years ago)

 

[foresterntree]

Pardon Our Interruption...

Apologies @Squareground3691 - didn’t realize this was the same link…

 

[av8or3]

Those metal elbows are good. It’s one of the first parts I pull from an otherwise junk carburetor. Definitely need to keep some around. Good find on eBay!

 

[ManiacalMark]

I ordered several of them once I figured out they were a tecumseh part.