JONSERED Jonsereds

[MACHINE]

I have one it has some transfer on it but I can try and clean it up if you want

I need a plastic cover , thanks

Sent from my SM-G955U using Tapatalk

 

[northwest saws]

I know I could just Google it or do some research but I'd rather ask here and generate some discussion/conversation. When did Husqvarna buy out Jonsereds? I am not very educated on then and haven't run them hardly at all.

Sent from my SM-N970U using Tapatalk

 

[jacob j.]

Looking for a cylinder cover for a 2065 ,
Any around?

Sent from my SM-G955U using Tapatalk

I think I got a pretty decent one - I have some 2065 stuff left over from a build.

 

[John235]

I know I could just Google it or do some research but I'd rather ask here and generate some discussion/conversation. When did Husqvarna buy out Jonsereds? I am not very educated on then and haven't run them hardly at all.
All I can add without googling is it was between the 910 and the 920 models.

Sent from my SM-N970U using Tapatalk

 

[John235]

I fffd up that quote thing. 920 and on had husqvarna-partner influence

 

[taplinhill]

I know I could just Google it or do some research but I'd rather ask here and generate some discussion/conversation. When did Husqvarna buy out Jonsereds? I am not very educated on then and haven't run them hardly at all.

Sent from my SM-N970U using Tapatalk

Husqvarna did not buy out Jonsereds. They were both acquired by Electrolux along with several other brands. Electrolux bought Jonsereds in 1978. Jonsereds saws retained their own designs for several years and as they were replaced the Husqvarna and Partner influence could be seen. It wasn't until about 2000 that all the Jonsereds were Red Husqvarnas.

 

[northwest saws]

Husqvarna did not buy out Jonsereds. They were both acquired by Electrolux along with several other brands. Electrolux bought Jonsereds in 1978. Jonsereds saws retained their own designs for several years and as they were replaced the Husqvarna and Partner influence could be seen. It wasn't until about 2000 that all the Jonsereds were Red Husqvarnas.

Very interesting, something I did not know. Thanks!

Sent from my SM-N970U using Tapatalk

 

[davidwyby]

I need a 2013 2166/2172 xtorq hand guard or whole parts saw

Thanks

 

[Ronie]

I need a 2013 2166/2172 xtorq hand guard or whole parts saw

Thanks

Might be more than you want to spend but here's one.https://www.sawagain.com/jonsered-2172-redmax-gz7100-brake-handle-new-oem-576255901/

 

[davidwyby]

Looks right but inexperience and different part number give me pause. The price is ok but don’t need it fixed immediately so if a used one or whole saw comes up, more gooder.

 

[trooney]

Looks right but inexperience and different part number give me pause. The price is ok but don’t need it fixed immediately so if a used one or whole saw comes up, more gooder.

I finally got one off Sawagain because my ad was up a long time.

 

[davidwyby]

I found a guy with some pre XT parts saws. @Bcorradi

I might want to go pre XT anyway...can you guys help with parts interchangeability? @afleetcommand @huskihl ?

Thanks!

 

[afleetcommand]

As far as hand guards nd handle bars, the Jonsered saw are unique and will not cross with Husqvarna parts. Reason? Tank has different spacing for the handle bar screws on the pto side. And the top cover is different because of both the pull start and straight chain brake handle. And the chain brake handle AND little metal "lever" it attaches to are also unique to the red saws. BUT if you get desperate, the Jonsered cases/muffler thru filter holder etc. will fit with the Husqvarna tank/handles/ etc . Accept the pull start & top covers , then all the Husqvarna parts would work

 

[davidwyby]

@afleetcommand Thanks! How about early/late saws within the J-Red brand? My handle has one open window and when I look online, some have a bar across them. P/Ns are all over the place.

 

[afleetcommand]

The "Original Edition" 2065/2071/2165/2171's will pretty much interchange with each other. The 2166/2172 will fit on the older saws as well, just because the 2166/2172 cylinder is a different design therefore taller than the older OE 2065/2071/2165/2171 design. But stuff like chain brake handle, handle bar, top cover etc. from the earlier saws won't fit well in the newer x-troq 2166/2172's.

 

[pbillyi69]

i bought a full wrap husqvarna handlebar for my jonsered and was told that it would interfear with the breake handle but it fits just fine and works without any issues. i got the husky brake handle because of that info and it too quite a bit of grinding to get it to fit the jred because it wouldnt go down far enough on the brake lever for the hole to line up

 

[pbillyi69]

i just thought that was interesting. i forgot to say its a jred 2188 and husky 390 that im talking about

 

[Ronaldo]

New to me Jonsered 2252. Smooth operator and pretty snappy runner.

Sent from my SM-G930VL using Tapatalk

 

[davidwyby]

The "Original Edition" 2065/2071/2165/2171's will pretty much interchange with each other. The 2166/2172 will fit on the older saws as well, just because the 2166/2172 cylinder is a different design therefore taller than the older OE 2065/2071/2165/2171 design. But stuff like chain brake handle, handle bar, top cover etc. from the earlier saws won't fit well in the newer x-troq 2166/2172's.

It seems like OE used and parts saws are more common and available and will fit newer parts if they come along like you said...I wonder if I shouldn't go OE for parts saw availability...

 

[blackbruin]

It seems like OE used and parts saws are more common and available and will fit newer parts if they come along like you said...I wonder if I shouldn't go OE for parts saw availability...

Best bet. Plus non strato will last longer anyways