Jonsered 920 AV buffer mystery screw

[Deputyrpa]

I finally got my Jonsered 920 back together, and wound up with a two extra screws. One small philips head, and a longer socket head M5. Hoowever, I am missing a screw for the clutch side AV buffer bracket that attached it to the case. It's the one my finger is pointing to. I looked up the part number, 725 53 30-55, allegedly an M5 x 30, but I tried screwing the long M5 into it to see if it fits, but the screw diameter was too smallto grab. Does anyone know what size it is? Is it a screw and nut? Thanks.

 

[jacob j.]

@jacktheripper

 

[hacskaroly]

Hoowever, I am missing a screw for the clutch side AV buffer bracket that attached it to the case. It's the one my finger is pointing to.

I am not familiar with this saw, is this the screw and AV buffer in question from the IPL?

 

[Deputyrpa]

I am not familiar with this saw, is this the screw and AV buffer in question from the IPL?

View attachment 488832

No sir, it's on the clutch side - the one on the first page of the parts booklet, #725 53 30-55.

 

[heimannm]

 

[Deputyrpa]

View attachment 488903

Yep, the one up top that goes thru the rubber buffer tab.

 

[heimannm]

That is the same screw (by PN) that holds the carburetor support, look and see what those are for reference.

Mark

 

[jacktheripper]

These are all pretty standard screws, m4 or m5. Just go to Ace and grab a hex cap screw from the bin?

 

[Deputyrpa]

The M5 screw I tried didn't grab. I have to look closely to see if it stripped.