hacskaroly
Pinnacle OPE Member
- Local time
- 2:21 AM
- User ID
- 27954
- Joined
- Nov 24, 2023
- Messages
- 817
- Reaction score
- 2,391
- Location
- Northern Idaho
Does anyone have any information (website, pdf, ...etc) that helps explain the Husqvarna parts number system, for example: 725 53 45-55. This number is for a carburetor/intake elbow screw on a 2100CD. I have found on another website that this part number references to a "Mc6s 5x65", I am not sure what the "Mc6s" stands for, but I am guessing the 5x65 is M5 screw by 65 mm long. Hopefully someone can correct me if I am wrong.
Going back to the part numbers, there are two other screws associated with the carburetor assembly, 725 52 87-55 and 725 53 33-55. To really "screw" things up for me, another screw on the diagram has a part number of 501 43 55-01. Again, I am guessing that this correlates to a Group-Type-sub type-part format, similar to what Stihl uses, but I have not found anything that explains it. Some of these screws I am looking for are discontinued and I am trying to find their dimensions to see if I can find a suitable sub where possible.
Going back to the part numbers, there are two other screws associated with the carburetor assembly, 725 52 87-55 and 725 53 33-55. To really "screw" things up for me, another screw on the diagram has a part number of 501 43 55-01. Again, I am guessing that this correlates to a Group-Type-sub type-part format, similar to what Stihl uses, but I have not found anything that explains it. Some of these screws I am looking for are discontinued and I am trying to find their dimensions to see if I can find a suitable sub where possible.
