High Quality Chainsaw Bars Husqvarna Toys

homelite Super XL-925

295 tramp

Hillbilly Saws
Local time
10:49 PM
User ID
112
Joined
Dec 23, 2015
Messages
401
Reaction score
1,034
Location
Minnesota
I finally got a chance to put my 925 in some wood today.
Kick back reared its ugly head, Always be prepared.
 

exSW

'Cause Thomas is a poopyhead
Local time
11:49 PM
User ID
109
Joined
Dec 23, 2015
Messages
5,072
Reaction score
16,690
Location
United States
Country flag
Wish mine ran that good.
 

295 tramp

Hillbilly Saws
Local time
10:49 PM
User ID
112
Joined
Dec 23, 2015
Messages
401
Reaction score
1,034
Location
Minnesota
What's wrong with your?
I have to go back through the carb, I have the high side almost closed and it still 4 strokes
 

exSW

'Cause Thomas is a poopyhead
Local time
11:49 PM
User ID
109
Joined
Dec 23, 2015
Messages
5,072
Reaction score
16,690
Location
United States
Country flag
Runs like a bear on prime but that's it. Rebuilt the carb,replaced the intake block and gaskets. New fuel line . Still no fuel delivery. I'm thinking lack of impulse due to bad seals but haven't gotten that far yet.
 

295 tramp

Hillbilly Saws
Local time
10:49 PM
User ID
112
Joined
Dec 23, 2015
Messages
401
Reaction score
1,034
Location
Minnesota
I replaced the fuel line but didn't buy the oem. I pulled some tarragon thru another bigger piece about 1" long and got it to go thru the case to seal it.
Mines a hard starter cold possibly the points, but after it warms up it starts OK. Mines not far away from a seal job to. it took a long time to get it to idle right.
 

exSW

'Cause Thomas is a poopyhead
Local time
11:49 PM
User ID
109
Joined
Dec 23, 2015
Messages
5,072
Reaction score
16,690
Location
United States
Country flag
I replaced the fuel line but didn't buy the oem. I pulled some tarragon thru another bigger piece about 1" long and got it to go thru the case to seal it.
Mines a hard starter cold possibly the points, but after it warms up it starts OK. Mines not far away from a seal job to. it took a long time to get it to idle right.
That's what is so frustrating about mine. Fires instantly on prime.
 

295 tramp

Hillbilly Saws
Local time
10:49 PM
User ID
112
Joined
Dec 23, 2015
Messages
401
Reaction score
1,034
Location
Minnesota
Do you use that throttle advance button when you start it?
 

295 tramp

Hillbilly Saws
Local time
10:49 PM
User ID
112
Joined
Dec 23, 2015
Messages
401
Reaction score
1,034
Location
Minnesota
does the impulse come from the cylinder or crank case?
have you checked the hole to see if it might be plugged?
 

exSW

'Cause Thomas is a poopyhead
Local time
11:49 PM
User ID
109
Joined
Dec 23, 2015
Messages
5,072
Reaction score
16,690
Location
United States
Country flag
does the impulse come from the cylinder or crank case?
have you checked the hole to see if it might be plugged?
Been all through the impulse circuit. All clear.
 
Top