Hand peices? Motors? Mandrels?

[RockiesRider]

Having a difficult time tracking down the 90ﾟ angle hand piece and peace for the foredom flex shaft motors. I'd anyone has some advice or direction for me it would be appreciated. My dream of flex shaft finally Bit the big one And since it's Christmas time I decided I was gonna upgrade.

 

[Stump Shot]

http://www.ccspecialtytoolstore.com/90-degree-porting-tool-s/327.htm

 

[huskihl]

Foredom doesn’t make one any longer

 

[RockiesRider]

http://www.ccspecialtytoolstore.com/90-degree-porting-tool-s/327.htm

Thanks boss

 

[RockiesRider]

http://www.ccspecialtytoolstore.com/90-degree-porting-tool-s/327.htm

Ahem cough I see.
Does anyone know of something in between the above mentioned tools and the dremel?

 

[wcorey]

Ahem cough I see.
Does anyone know of something in between the above mentioned tools and the dremel?

Check out this thread for the aftermarket right angle info…

https://opeforum.com/threads/which-foredom-square-drive-or-key-tip.24704/

 

[ManiacalMark]

Foredom doesn’t make one any longer

Foredom had a latch type 90 degree hand piece I had years ago, garbage.

 

[huskihl]

Foredom had a latch type 90 degree hand piece I had years ago, garbage.

That’s prolly why.

Most use the 182mc now

 

[ManiacalMark]

That’s prolly why.

Most use the 182mc now

Im curious if anyone has used the 200amc on a saw

 

[huskihl]

Im curious if anyone has used the 200amc on a saw

The only one from cc I’ve used was the 182. Not certain on the other ones from them

 

[ManiacalMark]

It’s slightly bigger but has a gear reduction than the 182

 

[srcarr52]

It’s slightly bigger but has a gear reduction than the 182

You would want any gear reduction. They cut slow enough already.

 

[ManiacalMark]

Touché

 

[Al Smith]

Just for general conversion you can find longer shaft burrs ,cutters etc . Although it's difficult you can do the upper transfers but it's tedious work working through the exhaust port but it can be done with a straight shaft head . When you factor also much of the work will need to be done by looking through a mirror in which every movement will appear backwards visually speed is not important . An opinion no more no less .