Gun range 2022,2023,2024,2025,2026

[FergusonTO35]

View attachment 484174
I will be buying this when available
Inglis just introduced the 2035
Updated the browning hi power p35 design.
I think I'll like this better than the 2011s

The Browning Hi-Power is my favorite handgun of all time and I have one of the last ones produced by FN. I really like the traditional style Hi Powers offered by Inglis, I wonder if they are Browning parts compatible?

 

[Czed]

The Browning Hi-Power is my favorite handgun of all time and I have one of the last ones produced by FN. I really like the traditional style Hi Powers offered by Inglis, I wonder if they are Browning parts compatible?

Fully compatible except frame and slide
I've seen many positive reviews on these inglis turkish clones
Some on the forums say they hold up better than fn/brownings cast or forged
frames.
They were quite soft I shot with a idpa guy in the 90s he went through several of them in the time I knew him.

 

[Czed]

So I had to go back and look. The p-10 I have was purchased in in early 2020 because Rural King had been advertising them for $389. Suppressor ready model. I bought it because I can almost not refuse a great deal if I come across one (and I have any foldin money available). Had bought a p-09 and been happy with it so I figured the 10 would also be a winner. It has been kept as potential trading stock since, NIB. I have not had the time to think about swapping platforms for hangun defense. I'm fairly trained with a FNS9. The p-10s do feel really good in hand. Didn't care initially for the stipling but it grew on me.

I've bought several guns from RK I just hate the very long pick up process I've been there over an hour before they have a crappy process
My local gunstore at the end of my road
another reason I buy too much stuff lol
Has like 5 minutes nics check pay and walk out.
RK had the non optics cz p10 sub compact and full sizes last summer for 325.00 so I bought a fullsize
I regret not getting the subcompact
But I've got my shield plus's my favorite little one
The p10 series are just very soft shooters to me personally
I can shoot fast and stay on target.
now I cannot with the canik pistols as much as I like them they are hard for me to keep on track at speed i sold them all.
Not buying one but here's a fair deal on a p-07

 

[Czed]

Where did you get the CZ p10?

Guy at work he buys stuff all the time and loses interest
Mostly bows and crossbow crap I don't want
This time it was pistols.
He's odd didn't even shoot them or anything
Had the .22 for like 5 year's

 

[Czed]

Rk has some good deals this week
I really like my taurus carry just the smith is my favorite
And I've been told sig fixed the p322 I had a first month release I couldn't make run
I tried everything
But I did like the pistols trigger sights and ergos
I might try another one eventually.

 

[FergusonTO35]

I've bought several guns from RK I just hate the very long pick up process I've been there over an hour before they have a crappy process
My local gunstore at the end of my road
another reason I buy too much stuff lol
Has like 5 minutes nics check pay and walk out.
RK had the non optics cz p10 sub compact and full sizes last summer for 325.00 so I bought a fullsize
I regret not getting the subcompact
But I've got my shield plus's my favorite little one
The p10 series are just very soft shooters to me personally
I can shoot fast and stay on target.
now I cannot with the canik pistols as much as I like them they are hard for me to keep on track at speed i sold them all.View attachment 484227
Not buying one but here's a fair deal on a p-07

I worked at RK for five years. Good company overall, but they do some things bass-ackwards and refuse to change even though they lose a lot of sales from it.

 

[FergusonTO35]

Guy at work he buys stuff all the time and loses interest
Mostly bows and crossbow crap I don't want
This time it was pistols.
He's odd didn't even shoot them or anything
Had the .22 for like 5 year's

One of my college friends was like that. Had a huge arsenal and tons of reloading stuff but it was a cold day in hades when he actually went shooting.

 

[FergusonTO35]

So, I did some trading and ended up with a practically new with box and papers S&W 637-2 .38 Special and some reloading stuff. This revolver is as close to new as possible, zero cylinder turn line, no holster wear, no perceptible end shake, etc. I’m really stoked about it because I have another 637 I bought new years ago and have put thousands of rounds through, and it still shoots great. In fact, better than a lot of full size handguns.

So I give it a closer look under the light at home and the barrel to cylinder gap looks a bit wide to my eyeballs. I check it with the feeler gauges and I get .008. Now, it’s a snug .008, but still .008. Geez, my much cheaper stock Taurus 856’s are .003-.004. So I check old reliable high mileage 637 and she is .008 too! Well, hopefully the new stablemate will shoot just as good even with the boolit jumping that big crevasse. Is that normal for 21st century J frames? I guess if the gun shoots good and the gap doesn’t grow I can live with it, but that seems pretty wide to me. Especially considering my cheaper Taurus and Charter Arms revolvers have a lot less of a gap on average.

 

[RCBS]

I've bought several guns from RK I just hate the very long pick up process I've been there over an hour before they have a crappy process
My local gunstore at the end of my road
another reason I buy too much stuff lol
Has like 5 minutes nics check pay and walk out.
RK had the non optics cz p10 sub compact and full sizes last summer for 325.00 so I bought a fullsize
I regret not getting the subcompact
But I've got my shield plus's my favorite little one
The p10 series are just very soft shooters to me personally
I can shoot fast and stay on target.
now I cannot with the canik pistols as much as I like them they are hard for me to keep on track at speed i sold them all.View attachment 484227
Not buying one but here's a fair deal on a p-07

I was hot and heavy for these when they came out. Shortly after they released the -09 with more capacity so I went there instead. Ended up in an email thread with the executive assistant to president of CZ USA because I wanted a threaded barrel for it. They were available in Europe but not here so I shook the bush. Ended up with one of the very first threaded barrels in the US for the -09. Good weapon. The 1911 guys will feel right at home with it, ergo wise in my opinion. Tad heavy for a poly 9mm. Weighty slide keeps the muzzle flat.

 

[FergusonTO35]

I was able to give the new 637 a quick test drive before work today at 10 yards with 3.2 grains Titegroup under 148 grain Lyman wadcutters. I'm happy to report that she is shooting great! As long as that continues I'll be very happy, it certainly has been the case for my older 637.

 

[Czed]

https://www.reddit.com/r/gundeals/s/Ime3KkQdnN

Cheap gen4 slide kit

 

[Czed]

Shield x 400.00 after rebate