PAST CT fall GTG Nov 5th 2016

[RI Chevy]

Sounds like your 460 is happier at a little higher RPM.

 

[paragonbuilder]

But someone needs to time them with a stop watch.

 

[paragonbuilder]

Is it just me or is the chain getting slower every cut?

The wood was very hard and probably was getting slower.... Which means my 460 lost by even more...

 

[RI Chevy]

They are all real close Dan.
They are all awesome pieces of work.

 

[paragonbuilder]

I don't have a longer bar, but Keith that is incredible that your hybrid is matching or beating a very strong 064 with a 28" bar! Congrats man!! You found something here. I wish I had time to study what you did before it left...

 

[RI Chevy]

Quick. Pull it apart Dan. Lol.
Just kidding. That Hybrid really is strong.

 

[paragonbuilder]

Sounds like your 460 is happier at a little higher RPM.

I've got to watch them again, but I'll never even run a 28" on it anyhow. It wears a 24". This just goes to show that unless you are wearing a very long bar, no need for an 85-90cc saw.

 

[paragonbuilder]

Quick. Pull it apart Dan. Lol.
Just kidding. That Hybrid really is strong.

Nah, I don't want 5 min with it. I want to study it. But I'm sure Keith would guide me anyways.

 

[jmssaws]

I think the hybrid is a second or 2 ahead but it looks like the chain is better then than later,looks like it's not throwing chips like before.

That's a good chunk of wood and I wish I had it.

 

[jmssaws]

I was wondering who Keith was. Lol

 

[paragonbuilder]

I think the hybrid is a second or 2 ahead but it looks like the chain is better then than later,looks like it's not throwing chips like before.

That's a good chunk of wood and I wish I had it.

Either way they are all great saws. If you weren't timing it you couldn't tell the difference.
Looks like that 064 needs a longer bar!

 

[paragonbuilder]

And all that was with an 8 pin folks! With a 7 pin they could be close with an even longer bar.

 

[paragonbuilder]

Quick. Pull it apart Dan. Lol.
Just kidding. That Hybrid really is strong.

Jeff to bad your 440 wasn't here to compare...

 

[RI Chevy]

Wow. Thanks again Dan.

 

[CR500]

Can't believe the 064 was beat by a Hybrid!!!! Strong Runner Deets!!!!

The 064 had a very strong 4stroke at 14.7, I am now picking up 4 stroking better and better with all the vids you guys post!

Was 15k to lean? It had a hint of bring rich I think? I would never run it at 15k unless I was playing with a 20" bar and 9 pin sprocket for fun lol.

Plan on running mostly a Reduced weight 24 or 28. Will throw a 20 on there from time to time lol

Sent from my non internal combustion device.

 

[paragonbuilder]

Just for fun now, here in my 394 @13.6 with a different bar and chain and a 7 pin. I couldn't get the Stihl bar on it. Chain was too short. Chain wouldn't self feed, so I had to dog it in.

 

[RI Chevy]

Lol. Video kind of stops when your half way through the wood. Still have audio, but video stops. Sounds good though Dan

 

[paragonbuilder]

Lol. Video kind of stops when your half way through the wood. Still have audio, but video stops. Sounds good though Dan

Weird. I'll load it again. Here it is @14.5

 

[RI Chevy]

Much better Dan. You had lots of sparks flying out the back with the saw chips. Pretty cool.
Did the other video work for you?

 

[paragonbuilder]

Much better Dan. You had lots of sparks flying out the back with the saw chips. Pretty cool.
Did the other video work for you?

Yeah it works on my phone. I deleted it from YouTube. I'm reloading it now.