CS2236T Now Available. Opinions?

[redtractor]

Our distributor just posted that we can order these. My boss will ask me about them and I'll need to give him some kind of info.

 

[04ultra]

Its a Redmax GZ3500/Husky T435.

Supposedly changed the chain brake

 

[Stackowood]

I've worked on several of the T435 huskies and although they have a lot of plastic they are a well built saw that is pretty easy to work on. I have not run one stock, but after opening up the muffler outlet, trimming the limiters, and opening up the air intake restriction they cut very well for 35cc.

Getting the tree guys to buy them and run them instead of their favorite Stihl is the challenge. You may need to put out a demo saw to get some interest and hope it doesn't get destroyed.

 

[fordf150]

we see quite a few of the husky variant of these...OK for a homeowner but wouldnt recommend them for commercial use. recoil housing break pretty easy if you pull any direction other than perfectly straight on the rope, A/V springs bend, and the metal engine housing breaks off where the bucking spike bolts on.

They should have stuck with the rebadged 338xpt because this is a few leaps backwards

 

[Stackowood]

Yes the spring mounts do seem a little soft. Haven't seen the recoil housing break, but I could see that happening with heavy use.