circle crank ms660

[CR500]

I have a snelling441 and it performs really well.

I figured this site was about learning from others trials and errors and since JM is such a nice guy ( convinced me to run50:1), I have a gut feeling that we may find something unique about the 661.

Sent from my non internal combustion device.

 

[Deets066]

I have a snelling441 and it performs really well.

I figured this site was about learning from others trials and errors and since JM is such a nice guy ( convinced me to run50:1), I have a gut feeling that we may find something unique about the 661.

Sent from my non internal combustion device.

There has been a lot figured out about the 661 around here lately, but I think there is still some on the table.

No doubt B Rad can build a good saw, he takes a different route than the way I like to build them but it don't mean his are bad.

 

[Moparmyway]

I have a gut feeling that we may find something unique about the 661.

Here is my unique 661 in some real hard oak

 

[CR500]

Here is my unique 661 in some real hard oak

Second vid sounds strong....

Deets- I will concur, since the 661 has been tinkered with more, some great gains have been made. STIHL did a good job with this saw stock but when ported it seems that 390xp has some serious competition now. Before some 660s were created it was kind of obvious that the 390 was a power house.

Not talking bad about any builder here but it goes to show that all saws just need R&D.

Sent from my non internal combustion device.

 

[Moparmyway]

Second vid sounds strong....

.

She is holding 11,900 in the second cut, and I believe the only competition to a ported 661 is a ported 394/395

 

[CR500]

She is holding 11,900 in the second cut, and I believe the only competition to a ported 661 is a ported 394/395

Still have to keep an eye out for some 390s.... the 395 is a saw I have not ran stock or ported.

I would like to start a husky/ j red collection as well.

Sent from my non internal combustion device.

 

[awol]

.......or a strong 064?!

 

[Keith Gandy]

.......or a strong 064?!

Ya I would like to see the right ported 064 or 390 against a 661 also. I believe either would take it but theres probably still more to be figured out on the 661 also

 

[mdavlee]

That 064 of Matt's is wicked fast.

 

[drf256]

There has been a lot figured out about the 661 around here lately, but I think there is still some on the table.

No doubt B Rad can build a good saw, he takes a different route than the way I like to build them but it don't mean his are bad.

More than one way to skin a cat.

But that understanding isn't always reciprocal.

 

[drf256]

Here is my unique 661 in some real hard oak

Mopar,

That saw looks great. Is that the one you ported yourself recently?

 

[Barneyrb]

That 064 of Matt's is wicked fast.

That one and Andy's too, both will haul azz

 

[mdavlee]

That one and Andy's too, both will haul azz

Yep. Never got to run Andy's.

 

[MG2186]

Scott said his 066 is faster than both those 064's, I've ran Matt's 064 and Scott's 066 but not side by side. Need less to say they both are really strong! Be interesting if anybody has a 390 that would even keep up with them


Sent from my iPhone using Tapatalk

 

[Ron660]

Scott said his 066 is faster than both those 064's, I've ran Matt's 064 and Scott's 066 but not side by side. Need less to say they both are really strong! Be interesting if anybody has a 390 that would even keep up with them


Sent from my iPhone using Tapatalk

Yea Jason's noodling videos proved the 066/660 was dominant against the 064 and 390.

 

[mdavlee]

Scott said his 066 is faster than both those 064's, I've ran Matt's 064 and Scott's 066 but not side by side. Need less to say they both are really strong! Be interesting if anybody has a 390 that would even keep up with them


Sent from my iPhone using Tapatalk

I have too in different states. I wish we could have had the 066 there a few weeks ago to run against that 064

 

[Moparmyway]

Mopar,

That saw looks great. Is that the one you ported yourself recently?

Thanks Doc !
Yes Sir it sure is !!
Lemme know when you want to run her

 

[drf256]

Thanks Doc !
Yes Sir it sure is !!
Lemme know when you want to run her

Spectacular!

 

[jmssaws]

I ran the 661 stock yesterday and it's going to have to make some big gains to hang with one of my other saws,my mild ported 395 will flogg it.

 

[jmssaws]

That's a good start but it's gunna need more than that! I heard ur 661 is gettin the Snelling treatment.

Lol