Chainsaw Gas tank repair

[vtrombly1]

@Spike60 @afleetcommand
Here's the gas tank repair I was telling you about.

 

[Ronaldo]

I've used this on an Echo tank 3 yrs ago and still no leaks.

Sent from my Z832 using Tapatalk

 

[vtrombly1]

I've used this on an Echo tank 3 yrs ago and still no leaks.

Sent from my Z832 using Tapatalk

Works great I forgot to mention in the video to do this in a well ventilated area lol. The stuff works good but really has some vapors lol.

 

[smokey7]

Give used it before also. I had a gap to fill so I used a combo of seal all and toilet paper. Once the tp gets wet with the seal all its quite tough. Been a rigged repair for several years now. I usually make sure to drain my stuff when I store but on repaired tanks I drain them as soon as I finish.

 

[vtrombly1]

Give used it before also. I had a gap to fill so I used a combo of seal all and toilet paper. Once the tp gets wet with the seal all its quite tough. Been a rigged repair for several years now. I usually make sure to drain my stuff when I store but on repaired tanks I drain them as soon as I finish.

I've done the layers of tape never the tp before the tape kinda makes it like fiberglass.

 

[Dolmar Junkie]

Better than JB weld? If so I will give it a try,I have a DCS401 that spontaneously sprang a leak in the seam of the tank. When I was a kid I broke a carb in half on a go-cart ! I put it back together with JB and it never leaked a drop and ran until I finally ran the engine into the ground. So it would have to go a long way to beat JB.....